3M MMM974 00 Hookit Gold 6" P360A Grit 216U Disc

Hookit? Gold Disc 00974, 6", P360A, 100 discs/bx

After backing the disc, it remains part of the assembly rather than breaking away after just a few cuts

For use on wood and metal

This grade is recommended for the removal of paint, rust, mill scale and coatings

Hookit? Gold Discs are premium quality abrasive discs used with P360A, or P320 grits

The open coat allows the disc to cut faster and longer with minimal clogging

Hookit? Gold Discs are designed for the removal of low to moderate surface defects, including paint over-spray, water spots and overspray

These Hookit discs work best on ferrous metals and offer the highest cut rates in abrasive technology

3M Hookit? Gold Discs 00974 are a hook and loop fastener attachment product

The Hookit? Gold Disc is intended for heavy duty grinding, removing rust and paint from steel, cast iron or aluminum

For best results, use them with Hookit? Gold 6" P360A Grip Pad Holder or Hookit! Gold 9" P360A Grip Pad Holder

The finest particle size with the highest rated cut rate in a 974-type disc

They are also ideal for use on basecoat/clear coat systems

A hook and loop fastener with two hook facing sides (A) and two loop facing sides (B)

The Hookit? Design is laser-welded onto the disc

This design allows you to use the same disc over and over again

3M Hookit Gold Discs are designed for grinding and finishing concrete, stone, terrazzo and other masonry surfaces

3M engineered Hookit discs to be long lasting, ideal for grinding, deburring, and finishing in metalworking applications

This Hookit? Gold Disc 00974 features a 6" diameter and is perfect for angular and contour sanding applications

Ideal for applications in which repeated removal is necessary

It has 220 grams of weight per disc, and is made from aluminum oxide abrasive compound

These products are cost effective alternatives to rivets, bolts and screws

3M Hookit discs are designed to provide extreme cutting power on a variety of materials

The 3M MMM974 Gold Hookit? Discs have a reinforced edges that wear longer and cut faster, especially on abrasive surfaces

Hookit? Gold Discs contain no china fillers, binders or chemical coatings and can be used wet or dry

The discs are polymer-bonded to a steel backing, which eliminate the need for rim protectors or mounting plates

The Hookit Gold Discs are designed for use with the Hookit system by 3M

These discs are not suitable for use with conventional sanding machines

Hookit? discs cut faster, last longer, and stay sharper than other discs

The Hookit? Discs are used with Rotary Sanders or Cutters to sand and finish wood floors prior to refinishing

Hookit? Gold Disc 00974, 6", P360A, 100 discs/bx

After backing the disc, it remains part of the assembly rather than breaking away after just a few cuts

For use on wood and metal

This grade is recommended for the removal of paint, rust, mill scale and coatings

Hookit? Gold Discs are premium quality abrasive discs used with P360A, or P320 grits

The open coat allows the disc to cut faster and longer with minimal clogging

Hookit? Gold Discs are designed for the removal of low to moderate surface defects, including paint over-spray, water spots and overspray

These Hookit discs work best on ferrous metals and offer the highest cut rates in abrasive technology

3M Hookit? Gold Discs 00974 are a hook and loop fastener attachment product

The Hookit? Gold Disc is intended for heavy duty grinding, removing rust and paint from steel, cast iron or aluminum

For best results, use them with Hookit? Gold 6" P360A Grip Pad Holder or Hookit! Gold 9" P360A Grip Pad Holder

The finest particle size with the highest rated cut rate in a 974-type disc

They are also ideal for use on basecoat/clear coat systems

A hook and loop fastener with two hook facing sides (A) and two loop facing sides (B)

The Hookit? Design is laser-welded onto the disc

This design allows you to use the same disc over and over again

3M Hookit Gold Discs are designed for grinding and finishing concrete, stone, terrazzo and other masonry surfaces

3M engineered Hookit discs to be long lasting, ideal for grinding, deburring, and finishing in metalworking applications

This Hookit? Gold Disc 00974 features a 6" diameter and is perfect for angular and contour sanding applications

Ideal for applications in which repeated removal is necessary

It has 220 grams of weight per disc, and is made from aluminum oxide abrasive compound

These products are cost effective alternatives to rivets, bolts and screws

3M Hookit discs are designed to provide extreme cutting power on a variety of materials

The 3M MMM974 Gold Hookit? Discs have a reinforced edges that wear longer and cut faster, especially on abrasive surfaces

Hookit? Gold Discs contain no china fillers, binders or chemical coatings and can be used wet or dry

The discs are polymer-bonded to a steel backing, which eliminate the need for rim protectors or mounting plates

The Hookit Gold Discs are designed for use with the Hookit system by 3M

These discs are not suitable for use with conventional sanding machines

Hookit? discs cut faster, last longer, and stay sharper than other discs

The Hookit? Discs are used with Rotary Sanders or Cutters to sand and finish wood floors prior to refinishing