AES Industries AD8525 Windshield Wiper Arm Remover Pliers

PLIERS WIPER ARM REMOVER

AD8525—PLIERS WIPER ARM REMOVER

A E S Industries AD8525 Pliers Wiper Arm Remover is a two channel manual wire and cable stripper. The channels contain set blades to produce stripping of up to 11 mm (3/8") diameter insulated wire and cable, and it also features handles with comfortable soft rubber coating.

The AD8525 is a pliers wiper arm remover. It has a single end for removing wipers upon initial installation or replacement. It can also be used to remove coatings during installation. This tool will be most useful to engineers and technicians that install or repair wiper components.

The AD8525 pliers wiper arm remover is a press assembly for automotive wiper arms where the motor shaft takes up play in the pivot joint of the arm. It is made from carbon steel material and is heat-treated prior to plating.

The AD8525 from A E S INDUSTRIES, Inc. is a high quality Wiper Arm Remover that makes installations and repairs of wiper arms safe and easy. It provides optimal leverage when removing worn or damaged wiper arms. The top jaws feature a brazed carbide cutter for quick removal of worn wiper arm bushings. The large base plates are solid hardened steel to withstand many hours of use. Select models feature nylon molded grips for comfort and extended periods of use.

Quickly and easily remove wiper arms from windshield posts with this handy arm remover tool. Constructed of heavy duty steel, no longer will you require a pry bar to remove stuck windshield wiper arms. Simply insert the straight end into the insertion pin hole and tap on the end of the arm to release it from its post.

This unique tool is for the removal of stubborn wiper arms on trucks, buses or large fleet vehicles. It may be used on models where only the smaller wiper arm can be removed by hand. Just clamp the arms into the jaws of this durable tool and rotate counterclockwise to remove the wiper arm assembly.

PLIERS WIPER ARM REMOVER

AD8525—PLIERS WIPER ARM REMOVER

A E S Industries AD8525 Pliers Wiper Arm Remover is a two channel manual wire and cable stripper. The channels contain set blades to produce stripping of up to 11 mm (3/8") diameter insulated wire and cable, and it also features handles with comfortable soft rubber coating.

The AD8525 is a pliers wiper arm remover. It has a single end for removing wipers upon initial installation or replacement. It can also be used to remove coatings during installation. This tool will be most useful to engineers and technicians that install or repair wiper components.

The AD8525 pliers wiper arm remover is a press assembly for automotive wiper arms where the motor shaft takes up play in the pivot joint of the arm. It is made from carbon steel material and is heat-treated prior to plating.

The AD8525 from A E S INDUSTRIES, Inc. is a high quality Wiper Arm Remover that makes installations and repairs of wiper arms safe and easy. It provides optimal leverage when removing worn or damaged wiper arms. The top jaws feature a brazed carbide cutter for quick removal of worn wiper arm bushings. The large base plates are solid hardened steel to withstand many hours of use. Select models feature nylon molded grips for comfort and extended periods of use.

Quickly and easily remove wiper arms from windshield posts with this handy arm remover tool. Constructed of heavy duty steel, no longer will you require a pry bar to remove stuck windshield wiper arms. Simply insert the straight end into the insertion pin hole and tap on the end of the arm to release it from its post.

This unique tool is for the removal of stubborn wiper arms on trucks, buses or large fleet vehicles. It may be used on models where only the smaller wiper arm can be removed by hand. Just clamp the arms into the jaws of this durable tool and rotate counterclockwise to remove the wiper arm assembly.