BLUE SEA 5290BSS FUSE ATC EASYID

FUSE ATC EASYID

The FUSE ATC EASYID is a high-quality trailerable vessel with an easy-access system for emergency steering that provides maximum under powers trailering safety. Some of the other great features include the SmartTEC II propulsion system, a refrigeration unit with 12-volt/110-volt power, and bow and stern thruster system.

The BLUE SEA Systems FUSE ATC EASYID is a rugged and tough, high-flexibility-tensile-strength, fully bonded and fully waterproof Polyolefin tape that can be applied to boats' outside painted surfaces for identification purposes.

Designed for easy and safe interior navigation by the automatic transmissions of seagoing yachts, as well as traditional powerboats, the BLUE SEA SYSTEMS FUSE ATC EASYID provides outfitting flexibility, enhanced safety and reliability. This easy-to-install, non-drift fuse is maintenance free and does not require annual testing. It is built with a solid-state transducer to avoid possible breaking of fragile glass cells when dropped.

The BLUE SEA FUSE ATC EASYID is a small battery monitor that attaches to the positive terminal of a battery bank and accesses statistics through an IP network. This self-powered unit measures the battery bank capacity in volts, amp hours, state of charge, percent charged, CCA

The Blue Sea 5290BSS Fuse ATC EasyID is a 2 way Charger, The Fuse ATC chargers can charge both 110 and 240V batteries in the same unit by using the supplied plug for each type of voltage.

Blue Sea Systems? 5290BSS Fuse ATC EasyId is a waterproof fuse block with two independent circuits for ignition and accessory functions. All terminals are labeled in bold type, allowing easy identification of each terminal. Each fuse holder (10-amp max) has a removable lid for easy replacement of fuses. All terminals accept up to 4 gauge wire, while the two main terminal blocks have 5/16-24 studs capable of accommodating 8 to 14 gauge wires. High visibility gray terminal block labels provide clear circuit mapping: ignition, battery, horn/buoy/horn relay, control box; bilge pump

The Blue Sea Systems 5290BSS Fuse Buss ATC Easy ID -- With this unit, the circuit protection is the battery. The fuse is just for over current protection from tow vehicle electrical demands. It's a very active system that protect multiple components and does it with a small footprint. Not only does it offer excellent control on its own but can be used to add a proportional brake controller, automatic transmission skid control and sensors, to run everything from a single spot in your dash or eliminating other fuses in your fuse panel.

FUSE ATC EASYID

The FUSE ATC EASYID is a high-quality trailerable vessel with an easy-access system for emergency steering that provides maximum under powers trailering safety. Some of the other great features include the SmartTEC II propulsion system, a refrigeration unit with 12-volt/110-volt power, and bow and stern thruster system.

The BLUE SEA Systems FUSE ATC EASYID is a rugged and tough, high-flexibility-tensile-strength, fully bonded and fully waterproof Polyolefin tape that can be applied to boats' outside painted surfaces for identification purposes.

Designed for easy and safe interior navigation by the automatic transmissions of seagoing yachts, as well as traditional powerboats, the BLUE SEA SYSTEMS FUSE ATC EASYID provides outfitting flexibility, enhanced safety and reliability. This easy-to-install, non-drift fuse is maintenance free and does not require annual testing. It is built with a solid-state transducer to avoid possible breaking of fragile glass cells when dropped.

The BLUE SEA FUSE ATC EASYID is a small battery monitor that attaches to the positive terminal of a battery bank and accesses statistics through an IP network. This self-powered unit measures the battery bank capacity in volts, amp hours, state of charge, percent charged, CCA

The Blue Sea 5290BSS Fuse ATC EasyID is a 2 way Charger, The Fuse ATC chargers can charge both 110 and 240V batteries in the same unit by using the supplied plug for each type of voltage.

Blue Sea Systems? 5290BSS Fuse ATC EasyId is a waterproof fuse block with two independent circuits for ignition and accessory functions. All terminals are labeled in bold type, allowing easy identification of each terminal. Each fuse holder (10-amp max) has a removable lid for easy replacement of fuses. All terminals accept up to 4 gauge wire, while the two main terminal blocks have 5/16-24 studs capable of accommodating 8 to 14 gauge wires. High visibility gray terminal block labels provide clear circuit mapping: ignition, battery, horn/buoy/horn relay, control box; bilge pump

The Blue Sea Systems 5290BSS Fuse Buss ATC Easy ID -- With this unit, the circuit protection is the battery. The fuse is just for over current protection from tow vehicle electrical demands. It's a very active system that protect multiple components and does it with a small footprint. Not only does it offer excellent control on its own but can be used to add a proportional brake controller, automatic transmission skid control and sensors, to run everything from a single spot in your dash or eliminating other fuses in your fuse panel.