Brush Research BRMBC18MM Manufacturing BC18MM 18MM Brake Cylinder Flex Hone 180 Grit

HONE BRAKE CYLINDER FLEX 18MM 180 GRIT

The BRMBC18MM Manufacturing BC18MM 18MM Brake Cylinder Flex Hone 180 Grit is an abrasive shaft that allows for effectively honing and grinding hard to reach areas of a brake cylinder. The abrasive hones tackle the job at hand, providing a consistent, fast cutting results and extends the life of your equipment. Its long lasting durability will get tough jobs done without destroying the tool itself.

Hone your brake cylinders with the BC18MM Manufacturing 180 Grit Flex Hone from Brush Research. The product is rigid on one side and flexible on the other, making it suitable for curved or flat brake parts. It is intended for use with steel cylinders, but may also be used with aluminum or cast iron brake rotor drums. The product has a gloss black finish and measures 2.5 inches wide by 4 inches long by 1 inch deep, requiring some assembly upon delivery.

The BASIL BC 18MM Flex Brake Cylinder Hone is a pre-polished, flexible diamond hone for 180 grit. This hone features a brake master cylinder flex opening of 18mm. The BASIL BC18MM Flex Brake Cylinder Hone has a semi-flexible body designed to fit into tight spaces.

Our BC18MM flex hones are constructed with a fine toothed reversible head constructed of highly resilient Alloy Steel. These 180 grit Flex Hones offer an aggressive and efficient method of machining with long-lasting, non-glazed abrasives. In addition the Flex Hone can be used in both axes, providing for a complete finishing surface on the cylinder bore.

The BRMBC18MM is a flex hone designed to quickly and precisely hone brake cylinders, flex hoses and more. Designed with ease-of-use in mind this tool can be used with minimal training. The extra-long handle allows users to accurately hone even the most difficult of brake systems into the wheel drums found on most utility vehicles today, while the 180 grit allows for aggressive knife edge removal at high speeds.

This Flex Hone clicker is designed to be used on flex brake cylinders, this tool will not remove any material from the outside of the cylinder. The 180 grit sanding belt is applied by hand pressure against a hard surface and slowly moved back and forth across the piston bore, moving in reverse directions to achieve an even finish, both inside and out.

Manufacturing Flex Hone 180 Grit w/ 3/8"-24 Fadeless Chip Breaker for use with manufacturing tools.

HONE BRAKE CYLINDER FLEX 18MM 180 GRIT

The BRMBC18MM Manufacturing BC18MM 18MM Brake Cylinder Flex Hone 180 Grit is an abrasive shaft that allows for effectively honing and grinding hard to reach areas of a brake cylinder. The abrasive hones tackle the job at hand, providing a consistent, fast cutting results and extends the life of your equipment. Its long lasting durability will get tough jobs done without destroying the tool itself.

Hone your brake cylinders with the BC18MM Manufacturing 180 Grit Flex Hone from Brush Research. The product is rigid on one side and flexible on the other, making it suitable for curved or flat brake parts. It is intended for use with steel cylinders, but may also be used with aluminum or cast iron brake rotor drums. The product has a gloss black finish and measures 2.5 inches wide by 4 inches long by 1 inch deep, requiring some assembly upon delivery.

The BASIL BC 18MM Flex Brake Cylinder Hone is a pre-polished, flexible diamond hone for 180 grit. This hone features a brake master cylinder flex opening of 18mm. The BASIL BC18MM Flex Brake Cylinder Hone has a semi-flexible body designed to fit into tight spaces.

Our BC18MM flex hones are constructed with a fine toothed reversible head constructed of highly resilient Alloy Steel. These 180 grit Flex Hones offer an aggressive and efficient method of machining with long-lasting, non-glazed abrasives. In addition the Flex Hone can be used in both axes, providing for a complete finishing surface on the cylinder bore.

The BRMBC18MM is a flex hone designed to quickly and precisely hone brake cylinders, flex hoses and more. Designed with ease-of-use in mind this tool can be used with minimal training. The extra-long handle allows users to accurately hone even the most difficult of brake systems into the wheel drums found on most utility vehicles today, while the 180 grit allows for aggressive knife edge removal at high speeds.

This Flex Hone clicker is designed to be used on flex brake cylinders, this tool will not remove any material from the outside of the cylinder. The 180 grit sanding belt is applied by hand pressure against a hard surface and slowly moved back and forth across the piston bore, moving in reverse directions to achieve an even finish, both inside and out.

Manufacturing Flex Hone 180 Grit w/ 3/8"-24 Fadeless Chip Breaker for use with manufacturing tools.