Central Tools CEN4439 INDIC CONTACT & EXT SET 9PC (CEN-)

Indicator Contact & Extension

Central Tools CEN4439 Indicator Contact And Extension Set. The Central Tools INDIC CONTACT & EXTENSION SET includes eight different size indicator contacts and three different size extension rods. This set is useful for servicing electronic devices or building custom instrumentation.

Central Tools CEN4439 INDIC CONTACT & EXT SET 9PC (CEN-)

Central Tools CEN4439 9-Piece Indicator Contact & Extension Set.

The CEN4439 INDIC CONTACT & EXT SET consists of an electronic continuity tester, on off switch, 2-contact jumper wire, 4-contact jumper wire, 6-contact jumper wire, 1/4" slotted screwdriver tip and a pair of alligator clips.

The item is an indicator contact and extension set containing (9) items packaged in a plastic case. Item includes 0.5, 1.0 linear contact, (2) 1.0 blade contacts, (1) 1.5 blade contact, (2) 2.0 connectors with brass terminal pins on both ends, rubber insulators, and 22 AWG wire. The wire length is 36" long with insulation color as follows: 3 Black wires 36" long, 3 Brown wires 36" long, 1 Red wire 2' 8" long, 1 Blue wire 2' 8" long, 1 Yellow wire 2'

Keep track of the status of your engine sensors with these contact and extension sets. For use with DEX-20, DE5-20, DE10-20, DE15-20, DT15/DTA100, DG2, EG21, EG11, DT14/DT120 & DT26/DTA20 series contact indicators. 1/4" 3 pin female x male extensions with 9' cords

The CEN-4439 is a 9 Piece Contact & Extension Set. It includes (4) 1/8 (3) 1/4 (3) 5/16, (1) 3/8, (2) 7/16 Sockets, and a Magnetic Pickup Tool. The sockets are Black Chrome Vanadium with a Chrome plated finish. The Extension set has an extension bar that is 13" in length and a 3' long cable with 6 pin connector on end that plugs into the Central Tools CTD-7830 Cordless drill sold separately. This set is perfect for getting that hard to reach

Indicator Contact & Extension

Central Tools CEN4439 Indicator Contact And Extension Set. The Central Tools INDIC CONTACT & EXTENSION SET includes eight different size indicator contacts and three different size extension rods. This set is useful for servicing electronic devices or building custom instrumentation.

Central Tools CEN4439 INDIC CONTACT & EXT SET 9PC (CEN-)

Central Tools CEN4439 9-Piece Indicator Contact & Extension Set.

The CEN4439 INDIC CONTACT & EXT SET consists of an electronic continuity tester, on off switch, 2-contact jumper wire, 4-contact jumper wire, 6-contact jumper wire, 1/4" slotted screwdriver tip and a pair of alligator clips.

The item is an indicator contact and extension set containing (9) items packaged in a plastic case. Item includes 0.5, 1.0 linear contact, (2) 1.0 blade contacts, (1) 1.5 blade contact, (2) 2.0 connectors with brass terminal pins on both ends, rubber insulators, and 22 AWG wire. The wire length is 36" long with insulation color as follows: 3 Black wires 36" long, 3 Brown wires 36" long, 1 Red wire 2' 8" long, 1 Blue wire 2' 8" long, 1 Yellow wire 2'

Keep track of the status of your engine sensors with these contact and extension sets. For use with DEX-20, DE5-20, DE10-20, DE15-20, DT15/DTA100, DG2, EG21, EG11, DT14/DT120 & DT26/DTA20 series contact indicators. 1/4" 3 pin female x male extensions with 9' cords

The CEN-4439 is a 9 Piece Contact & Extension Set. It includes (4) 1/8 (3) 1/4 (3) 5/16, (1) 3/8, (2) 7/16 Sockets, and a Magnetic Pickup Tool. The sockets are Black Chrome Vanadium with a Chrome plated finish. The Extension set has an extension bar that is 13" in length and a 3' long cable with 6 pin connector on end that plugs into the Central Tools CTD-7830 Cordless drill sold separately. This set is perfect for getting that hard to reach