"FJC" FJC6014 FJC 6014 Vacuum Pump Adapter

VACUUM PUMP ADAPTER

This Vacuum Pump Adapter FJC-6014 is excellent for many applications where a vacuum pump is used to draw liquid, gas, and air. This item can be used to easily transfer the liquid or gas from one vessel to another while preventing backflow. Its valves are designed to hold the pressure in order to keep your fluids moving smoothly.

This vacuum pump adapter is designed to use on the "FJC" FJC6014 series of vacuum pumps. It can be used on our direct drive or gear drive vacuum pumps. It has a maximum operating pressure 12,500 psi (950 bar). It's can also be used on BSP pump fittings with use of additional adaptor.

The FJC6014 vacuum pump adapter is used to convert the standard 5/16" diameter vacuum port to ¼" for use with a 0.71" diameter hose. It comes complete with washers and screws.

FJ-6014 Vacuum Pump Adapter to fit any vacuum pump with a 5/8 inch thread.

The FJC Vacuum Pump Adapter is made specifically for R12 pumps. The adapter has a 1/8th NPT thread to fit most refrigeration system. This will allow you to be able to use an existing vacuum pump for R12 units.

The FJC Vacuum Pump Adapter is perfect for pumping brake fluid out of master cylinder and power steering reservoir, which cannot be done directly by the pump because of built-in check valve. The FJC Vacuum Pump Adapter can be connected to vacuum pump with quick connector, and the other end can be connected to the valve stem, securely sealed. By this way, the air in the valve body will be discharged and the fluid will flow out of its storage space.

This pump adapter works with a wet/dry vacuum to inflate and deflate your raft.

VACUUM PUMP ADAPTER

This Vacuum Pump Adapter FJC-6014 is excellent for many applications where a vacuum pump is used to draw liquid, gas, and air. This item can be used to easily transfer the liquid or gas from one vessel to another while preventing backflow. Its valves are designed to hold the pressure in order to keep your fluids moving smoothly.

This vacuum pump adapter is designed to use on the "FJC" FJC6014 series of vacuum pumps. It can be used on our direct drive or gear drive vacuum pumps. It has a maximum operating pressure 12,500 psi (950 bar). It's can also be used on BSP pump fittings with use of additional adaptor.

The FJC6014 vacuum pump adapter is used to convert the standard 5/16" diameter vacuum port to ¼" for use with a 0.71" diameter hose. It comes complete with washers and screws.

FJ-6014 Vacuum Pump Adapter to fit any vacuum pump with a 5/8 inch thread.

The FJC Vacuum Pump Adapter is made specifically for R12 pumps. The adapter has a 1/8th NPT thread to fit most refrigeration system. This will allow you to be able to use an existing vacuum pump for R12 units.

The FJC Vacuum Pump Adapter is perfect for pumping brake fluid out of master cylinder and power steering reservoir, which cannot be done directly by the pump because of built-in check valve. The FJC Vacuum Pump Adapter can be connected to vacuum pump with quick connector, and the other end can be connected to the valve stem, securely sealed. By this way, the air in the valve body will be discharged and the fluid will flow out of its storage space.

This pump adapter works with a wet/dry vacuum to inflate and deflate your raft.