H & S Autoshot HSA1016 UNI-PULLER DLX "T" HANDLE SLIDEHAMMER

UNI-PULLER DLX "T" HANDLE SLIDEHAMMER

1. HSA1016 UNI-PULLER DLX "T" HANDLE SLIDEHAMMER:

The HSA1016 is a UNI-PULLER DLX "T" HANDLE SLIDE HAMMER that is used to pull and/or pry under door thresholds, behind drywall, base board, hollow walls, and other places where a standard slide hammer cannot reach. It is made of carbon steel with two different counterbalance arms to allow different rigging options for weight and ease of use .

The Ultimate heavy duty Slide hammer,the UNI-PULLER DLX T Handle design provides continuous power without the strain and fatigue that comes with most standard slide hammers.The design allows you to generate more power without the need to keep re-gripping the handle like you have to do with any standard slide hammer.

The Uni-Puller DLX SlideHammer is a quality slide hammer for hard to reach ball joint and suspension component repairs. The lightweight frame is made of hardened steel for maximum strength. The t handle makes it easy to use with one hand.

T" Handle Slidehammer Puller is good for assembly repair and maintenance work with a wide range of applications, such as engine and transmission rebuilds. Ideal for removing lifters, cams and crankshaft pulley. Designed for use with Ford / General Motors 2V, 4V, 45, 46 - 48 trucks . .

SELF-CONTAINED, SINGLE MOTOR HYDRAULIC PULLER & STRETCHER. THE UNI-PULLER HAS AN EXTENDED SLIDE BAR TO ALLOW FOR USE ON BOTH A COMPACT AND FULL SIZE VEHICLE. HSA1016

The HSA1016 is a telescopic handle for the slidehammer that provides a multi-directional push and pull. The HSA1016 can be used as part of a tandem method without having to disconnect any components and then reconnect. The HSA1016 includes a DynaCord™ hexagonal yoke connector, two slotted steel caps, and two swivel bases. The "T" handle itself is constructed from heavy duty steel with stainless steel quick connects and pin in the support shaft that allows for easy positioning on both swing and lift directions.

UNI-PULLER DLX "T" HANDLE SLIDEHAMMER

1. HSA1016 UNI-PULLER DLX "T" HANDLE SLIDEHAMMER:

The HSA1016 is a UNI-PULLER DLX "T" HANDLE SLIDE HAMMER that is used to pull and/or pry under door thresholds, behind drywall, base board, hollow walls, and other places where a standard slide hammer cannot reach. It is made of carbon steel with two different counterbalance arms to allow different rigging options for weight and ease of use .

The Ultimate heavy duty Slide hammer,the UNI-PULLER DLX T Handle design provides continuous power without the strain and fatigue that comes with most standard slide hammers.The design allows you to generate more power without the need to keep re-gripping the handle like you have to do with any standard slide hammer.

The Uni-Puller DLX SlideHammer is a quality slide hammer for hard to reach ball joint and suspension component repairs. The lightweight frame is made of hardened steel for maximum strength. The t handle makes it easy to use with one hand.

T" Handle Slidehammer Puller is good for assembly repair and maintenance work with a wide range of applications, such as engine and transmission rebuilds. Ideal for removing lifters, cams and crankshaft pulley. Designed for use with Ford / General Motors 2V, 4V, 45, 46 - 48 trucks . .

SELF-CONTAINED, SINGLE MOTOR HYDRAULIC PULLER & STRETCHER. THE UNI-PULLER HAS AN EXTENDED SLIDE BAR TO ALLOW FOR USE ON BOTH A COMPACT AND FULL SIZE VEHICLE. HSA1016

The HSA1016 is a telescopic handle for the slidehammer that provides a multi-directional push and pull. The HSA1016 can be used as part of a tandem method without having to disconnect any components and then reconnect. The HSA1016 includes a DynaCord™ hexagonal yoke connector, two slotted steel caps, and two swivel bases. The "T" handle itself is constructed from heavy duty steel with stainless steel quick connects and pin in the support shaft that allows for easy positioning on both swing and lift directions.