Helicoil HEL4833 4833 Oxygen Sensor Thread Repair Kit M 18 x 1.5

This kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. Packaged in a blow molded case.

The HEL4833 4833 Oxygen Sensor Thread Repair Kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. Packaged in a blow molded case.

The HEL4833 Helicoil 4833 Oxygen Sensor Thread Repair Kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion, and over-torque. This kit features hexagon shaped nuts that are left permanently embedded in the damaged threads. The nut is designed with three equally-spaced fins on its bottom. The fins form a wedge which grips the surface of the threads and prevents the nut from rotating after installation. The HEL4833 is packaged in a blow molded case (package dimensions: 4-1/4" W x 2-5/8" H).

This kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. The O-ring on the tap makes sure there is a fluid tight seal when the nut is tightened.

Helicoil® Self Tapping Thread Repair Kits are used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. The kits include a self taping brass insert and tapping tool, eliminating the need for drilling and tapping.

The HELCOIL HEL4833 4833 Oxygen Sensor Thread Repair Kit M 18 x 1.5 is used for repairing tapped holes that have been stripped or damaged due to wear, corrosion and over-torque. Corrosion on the threaded surface can also be repaired using this kit. Your car will operate properly again with this simple repair kit.

The Helicoil 4833 is a repair kit that can be installed using a portable or bench mounted power driven tool. The Helicoil 4833 kit is used to repair tapped holes which have been stripped out or damaged due to wear, corrosion, and over-torque. This kit is used for M18 x 1.5 threaded holes. The kit contains 3 each of the following Helicoil sizes: 18 x 1.5; 22 x 1.5; 28 x 1.5; 62 x 2; and 66 x 2".

Helicoil™ thread repair kits are designed for repairing stripped, damaged or worn threads on screws, studs and bolts. They're ideal for fast repair of damaged threads in a preproduction environment as well as for emergency repairs on the field. Increases the strength of a repaired thread up to six times that of the original material before failure.  Each kit contains a specially formulated thread repair paste and a reusable applicator tip packed in blow molded case.

This kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. Packaged in a blow molded case.

The HEL4833 4833 Oxygen Sensor Thread Repair Kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. Packaged in a blow molded case.

The HEL4833 Helicoil 4833 Oxygen Sensor Thread Repair Kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion, and over-torque. This kit features hexagon shaped nuts that are left permanently embedded in the damaged threads. The nut is designed with three equally-spaced fins on its bottom. The fins form a wedge which grips the surface of the threads and prevents the nut from rotating after installation. The HEL4833 is packaged in a blow molded case (package dimensions: 4-1/4" W x 2-5/8" H).

This kit is used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. The O-ring on the tap makes sure there is a fluid tight seal when the nut is tightened.

Helicoil® Self Tapping Thread Repair Kits are used for repairing tapped holes which have been stripped or damaged due to wear, corrosion and over-torque. The kits include a self taping brass insert and tapping tool, eliminating the need for drilling and tapping.

The HELCOIL HEL4833 4833 Oxygen Sensor Thread Repair Kit M 18 x 1.5 is used for repairing tapped holes that have been stripped or damaged due to wear, corrosion and over-torque. Corrosion on the threaded surface can also be repaired using this kit. Your car will operate properly again with this simple repair kit.

The Helicoil 4833 is a repair kit that can be installed using a portable or bench mounted power driven tool. The Helicoil 4833 kit is used to repair tapped holes which have been stripped out or damaged due to wear, corrosion, and over-torque. This kit is used for M18 x 1.5 threaded holes. The kit contains 3 each of the following Helicoil sizes: 18 x 1.5; 22 x 1.5; 28 x 1.5; 62 x 2; and 66 x 2".

Helicoil™ thread repair kits are designed for repairing stripped, damaged or worn threads on screws, studs and bolts. They're ideal for fast repair of damaged threads in a preproduction environment as well as for emergency repairs on the field. Increases the strength of a repaired thread up to six times that of the original material before failure.  Each kit contains a specially formulated thread repair paste and a reusable applicator tip packed in blow molded case.