Helicoil HEL5528-12 Inch Fine Thread Repair Kit - Thread Size 3/4-16 x 1.125 Length (5528-12)

KIT 3/4-16

This kit contains one helix and one matching pilot for a 3/4-16 thread; one plastic mandrel to hold the helix while the threads are being cut; and the tools that are necessary to cut threads in any metal or plastic of any shape. The combination of cutting tool, holder, and mandrel makes this three piece kit ideal for all repairs. The holder has two holes into which the threaded end of the cutter is inserted, allowing both rotary hand threading (clockwise

3/4-16 x 1.125 Length (5528-12) _(HEL5528-12)_

If you need to repair a 3/4-16 threaded bolt that has become stripped, it is important that you have the proper nut and sleeve combination. Failure to match brand will result in poor performance, which may lead to further breakage or other problems.

Great for repairing threaded fasteners (such as an axle bolt) in a stud mount bearing housing. Helical-Cut (SCREW-IT). 12-Piece Kit, Length 1-1/4, Diameter 3/4 -16. Two large thread forming tools that grip the inside of the threaded rod to form the new thread, plus 10 drivers and 6 drill bits.

HEL® Thread Protectors are designed to be used as a permanent repair of damaged threads on a variety of equipment with 3/4 inch-16 female threaded equipment bores, whose diameter may vary from part to part. (View Technical Data Sheet for further info.) ASME B1.5M Nominal Pipe Size Threads may also be repaired using Helicoil® Inch Fine Thread Repair Kits by installing a Helicoil with the equivalent size of that portion of the thread damaged and repairing

The patented Heli-Coil thread repair system is used worldwide in repairing stripped threads. Available to fix different applications, these repair kits include a range of drill sizes and thread repair inserts. These easy-to-use kits are only necessary if the hole from the stripped thread is larger than 1/2 inch.

This kit includes 40 pieces and is used for a wide range of applications. Can be plated in nickel, brass gold or steel.

KIT 3/4-16

This kit contains one helix and one matching pilot for a 3/4-16 thread; one plastic mandrel to hold the helix while the threads are being cut; and the tools that are necessary to cut threads in any metal or plastic of any shape. The combination of cutting tool, holder, and mandrel makes this three piece kit ideal for all repairs. The holder has two holes into which the threaded end of the cutter is inserted, allowing both rotary hand threading (clockwise

3/4-16 x 1.125 Length (5528-12) _(HEL5528-12)_

If you need to repair a 3/4-16 threaded bolt that has become stripped, it is important that you have the proper nut and sleeve combination. Failure to match brand will result in poor performance, which may lead to further breakage or other problems.

Great for repairing threaded fasteners (such as an axle bolt) in a stud mount bearing housing. Helical-Cut (SCREW-IT). 12-Piece Kit, Length 1-1/4, Diameter 3/4 -16. Two large thread forming tools that grip the inside of the threaded rod to form the new thread, plus 10 drivers and 6 drill bits.

HEL® Thread Protectors are designed to be used as a permanent repair of damaged threads on a variety of equipment with 3/4 inch-16 female threaded equipment bores, whose diameter may vary from part to part. (View Technical Data Sheet for further info.) ASME B1.5M Nominal Pipe Size Threads may also be repaired using Helicoil® Inch Fine Thread Repair Kits by installing a Helicoil with the equivalent size of that portion of the thread damaged and repairing

The patented Heli-Coil thread repair system is used worldwide in repairing stripped threads. Available to fix different applications, these repair kits include a range of drill sizes and thread repair inserts. These easy-to-use kits are only necessary if the hole from the stripped thread is larger than 1/2 inch.

This kit includes 40 pieces and is used for a wide range of applications. Can be plated in nickel, brass gold or steel.