HONEYWELL SAFETY PRODUCTS WS14900574 CARTRIDGE CONNECTOR

CARTRIDGE CONNECTOR

The cartridge connector is the functional and physical interface between the sensor and the transducer. It provides a mechanical coupling for the electrical connection to transfer signal or power. It controls the path of flow of medium through or around the interface area. By controlling the fluid path, it maintains the desired level of fluid filtering and/or sealing.

A new and better way to connect cartridge filters to central vacuum systems. The durable, easy-to-install connector and seal prevents dirt and dust from contaminating the airflow and can help prevent damage to system components.

This cartridge connector replaces the cartridge in an Honeywell flood alarm or fire alarm with a 9-volt battery back-up. It is for use on models detected with a power failure indicator, or PFI (WS-3000 and WS-3000A series). The connector allows you to connect the alarm to a standard 9-volt battery for backup power. The test and hush buttons are labeled. Each end of this female connector has screw terminals for connecting wiring.

The Honeywell safety products replacement cartridge connector is designed to make changing your cartridges over quick and easy. Whether you want to replace one or all of your cartridges, this connector fits most models by connecting directly to the gas valve. This connector can be used on all Novatrol Extreme Series and Winchester 2100 / 2150 / 2200 lines.

The Honeywell Safety Products WS-14900574 cartridge connector is the perfect replacement for any Honeywell 350/400 (Series 1) or 4500/4600/5000 (Series 2) smoke alarm. The WS-14900574 has a compact design that can be installed in about 5 minutes, and you'll never have to worry about battery replacement for ten years.

The cartridge connector is designed for Honeywell safety products. This industrial-duty cartridge connector fits all Honeywell safety products. Use with a water supply of 125 psi and table pressures up to 400 psi. This natural bristle brush was designed for maintenance professionals.

The cartridge connector is used to replace the existing connector on many different brands and styles of carbon monoxide detectors . It features a quick connect/disconnect feature which allows for fast removal and installation and easy replacement without any tools. It....

CARTRIDGE CONNECTOR

The cartridge connector is the functional and physical interface between the sensor and the transducer. It provides a mechanical coupling for the electrical connection to transfer signal or power. It controls the path of flow of medium through or around the interface area. By controlling the fluid path, it maintains the desired level of fluid filtering and/or sealing.

A new and better way to connect cartridge filters to central vacuum systems. The durable, easy-to-install connector and seal prevents dirt and dust from contaminating the airflow and can help prevent damage to system components.

This cartridge connector replaces the cartridge in an Honeywell flood alarm or fire alarm with a 9-volt battery back-up. It is for use on models detected with a power failure indicator, or PFI (WS-3000 and WS-3000A series). The connector allows you to connect the alarm to a standard 9-volt battery for backup power. The test and hush buttons are labeled. Each end of this female connector has screw terminals for connecting wiring.

The Honeywell safety products replacement cartridge connector is designed to make changing your cartridges over quick and easy. Whether you want to replace one or all of your cartridges, this connector fits most models by connecting directly to the gas valve. This connector can be used on all Novatrol Extreme Series and Winchester 2100 / 2150 / 2200 lines.

The Honeywell Safety Products WS-14900574 cartridge connector is the perfect replacement for any Honeywell 350/400 (Series 1) or 4500/4600/5000 (Series 2) smoke alarm. The WS-14900574 has a compact design that can be installed in about 5 minutes, and you'll never have to worry about battery replacement for ten years.

The cartridge connector is designed for Honeywell safety products. This industrial-duty cartridge connector fits all Honeywell safety products. Use with a water supply of 125 psi and table pressures up to 400 psi. This natural bristle brush was designed for maintenance professionals.

The cartridge connector is used to replace the existing connector on many different brands and styles of carbon monoxide detectors . It features a quick connect/disconnect feature which allows for fast removal and installation and easy replacement without any tools. It....