HONEYWELL SAFETY PRODUCTS WS14900576 PLUGS RP18

PLUGS RP18

The PLUGS™ RP18 Receptacle is a device designed to support both PLUGS™ and the standard 3-blade 2-wire fan or light plug. This allows the user to install any receptacle into any commonly used wall box, eliminating remodeling cost and time.

The WS14900576 Plug RP18 is an Intrinsically Safe, 18-gauge, 800 Volt plug for use with the Charger RP18. The WS14900576 is designed to prevent the possibility of accidental energization in hazardous areas where flammable gases, liquids or dusts are present.

The Safety Products WS14900576 is a replacement and comes as a two piece pack. This particular plug is a 10 Amp 125 Volt Brown or White in color. The Safety Components product has been certified by ETL, C-US (ETL listed), CSA certification (Canadian Standards Association) and carries the mark of ZMVV-2. Also known as Honeywell Plug RP18 this can be used with the following models: F15C114V5100, F15C114V5200, F15C240, F25C114V5110, F35C240V5100

Plugs into standard duplex receptacle

Push in plugs are a revolutionary way to keep cords locked in place. Just insert the cord's head through the hole, and push to lock. Removes and inserts easily without damaging cords or plugs. -Push-In Cord End Plugs for use with all P/N WS14900576 cords only -Cord not included - Used for clean, professional-looking terminations - Spring loaded pins grip without marring coaxial cable or PL259 connector

These T-shaped, 18 gauge wire mesh electrical cord shorting plugs will ensure a secure connection so that the conductors of the flexible cord and plug cannot be separated.

Large outlet size fits our SuperMassive portable generators and most other generators

PLUGS RP18

The PLUGS™ RP18 Receptacle is a device designed to support both PLUGS™ and the standard 3-blade 2-wire fan or light plug. This allows the user to install any receptacle into any commonly used wall box, eliminating remodeling cost and time.

The WS14900576 Plug RP18 is an Intrinsically Safe, 18-gauge, 800 Volt plug for use with the Charger RP18. The WS14900576 is designed to prevent the possibility of accidental energization in hazardous areas where flammable gases, liquids or dusts are present.

The Safety Products WS14900576 is a replacement and comes as a two piece pack. This particular plug is a 10 Amp 125 Volt Brown or White in color. The Safety Components product has been certified by ETL, C-US (ETL listed), CSA certification (Canadian Standards Association) and carries the mark of ZMVV-2. Also known as Honeywell Plug RP18 this can be used with the following models: F15C114V5100, F15C114V5200, F15C240, F25C114V5110, F35C240V5100

Plugs into standard duplex receptacle

Push in plugs are a revolutionary way to keep cords locked in place. Just insert the cord's head through the hole, and push to lock. Removes and inserts easily without damaging cords or plugs. -Push-In Cord End Plugs for use with all P/N WS14900576 cords only -Cord not included - Used for clean, professional-looking terminations - Spring loaded pins grip without marring coaxial cable or PL259 connector

These T-shaped, 18 gauge wire mesh electrical cord shorting plugs will ensure a secure connection so that the conductors of the flexible cord and plug cannot be separated.

Large outlet size fits our SuperMassive portable generators and most other generators