Horizon Tool CAL165 In-Line Flaring Tool, for 3/16" to 3/8", 4.75mm to 8mm, Makes Single, Double or Bubble Flares, Case

In-Line Flaring Tool, for 3/16" to 3/8", 4.75mm to 8mm, Makes Single, Double or Bubble Flares, Case

Make all types of flares with the Tool Cal 165 In-Line Flaring Tool. This is an in-line flaring tool that includes a set of single, double and bubble flaring dies. It is designed for use with steel tubing 3/16" to 3/8", 4.75mm to 8mm, and creates single, double or bubble flares on standard MIG gun hoses, propane regulators and other connections.

The Horizon Tool CAL165 4/8" In-Line Flaring Tool makes single, double and bubble flaring with ease. It is for 3/16" to 3/8", 4.75mm - 8mm lines, produces flares from 5/16" O.D. to 7/16" O.D., and is extremely easy to use and durable. The case provides a convenient place to keep it organized and protected for years of use.

The Tool CAL165 In-Line Flaring Tool, for 3/16" to 3/8", 4.75mm to 8mm, has many features that make it a very beneficial product. Some of these features are the in-line head for control & accuracy in all three steps of a manual single or double flare installation, an ergonomic handle provided for better control and comfort, and a flare cutter capable of making single or double flares with one easy motion. The Tool CAL165 is capable of completing four flares per second and is recommended for use on soft copper tube used in air conditioner installations.

The Cal 165 In-Line Flaring Tool is designed for use on 3/16" to 3/8" (4.75mm to 8mm) sizes of tubing Ð used on small mufflers. It has a special flare die that, for 4 1/2" inside diameter tubing, produces one pair of flares, a single flare or a bubble flare.

The CAL165 is the easy way to create strong, durable, professional looking flares every time. The tool head will accept flare dies from 3/16" to 3/8" in 4.75mm to 8mm and makes single, double or bubble flares every time. The vivid blue color indicates flare size on each tool.

Always in stock at Global Industrial, the Horizon CAL165 inline flaring tool makes single, double or bubble flares in tubing sizes from 3/16 to 3/8 inch. This tool is used for both copper and aluminum tubing only.

Horizon Tools CAL165 4.75mm to 8mm In-Line Flaring Tool is perfect for residential and commercial applications. This in-line flaring tool accommodates 3/16" to 3/8" tubing with single or double flaring capability with up to 1.5" O.D. tubes. Includes case.

In-Line Flaring Tool, for 3/16" to 3/8", 4.75mm to 8mm, Makes Single, Double or Bubble Flares, Case

Make all types of flares with the Tool Cal 165 In-Line Flaring Tool. This is an in-line flaring tool that includes a set of single, double and bubble flaring dies. It is designed for use with steel tubing 3/16" to 3/8", 4.75mm to 8mm, and creates single, double or bubble flares on standard MIG gun hoses, propane regulators and other connections.

The Horizon Tool CAL165 4/8" In-Line Flaring Tool makes single, double and bubble flaring with ease. It is for 3/16" to 3/8", 4.75mm - 8mm lines, produces flares from 5/16" O.D. to 7/16" O.D., and is extremely easy to use and durable. The case provides a convenient place to keep it organized and protected for years of use.

The Tool CAL165 In-Line Flaring Tool, for 3/16" to 3/8", 4.75mm to 8mm, has many features that make it a very beneficial product. Some of these features are the in-line head for control & accuracy in all three steps of a manual single or double flare installation, an ergonomic handle provided for better control and comfort, and a flare cutter capable of making single or double flares with one easy motion. The Tool CAL165 is capable of completing four flares per second and is recommended for use on soft copper tube used in air conditioner installations.

The Cal 165 In-Line Flaring Tool is designed for use on 3/16" to 3/8" (4.75mm to 8mm) sizes of tubing Ð used on small mufflers. It has a special flare die that, for 4 1/2" inside diameter tubing, produces one pair of flares, a single flare or a bubble flare.

The CAL165 is the easy way to create strong, durable, professional looking flares every time. The tool head will accept flare dies from 3/16" to 3/8" in 4.75mm to 8mm and makes single, double or bubble flares every time. The vivid blue color indicates flare size on each tool.

Always in stock at Global Industrial, the Horizon CAL165 inline flaring tool makes single, double or bubble flares in tubing sizes from 3/16 to 3/8 inch. This tool is used for both copper and aluminum tubing only.

Horizon Tools CAL165 4.75mm to 8mm In-Line Flaring Tool is perfect for residential and commercial applications. This in-line flaring tool accommodates 3/16" to 3/8" tubing with single or double flaring capability with up to 1.5" O.D. tubes. Includes case.