Hutchins HUT5013 Standard Replacement Pad for 4920/8620 2-3/4 x 16 Inch

MODEL 2000 VA/DF, VA/DF PSA Pad 18 Hole Pattern

Our red Deluxe Flangeless Wool Pad Model 2000 VA, DF has round holes and goes with the following polishers: 2 HP Porter Cable Model 4920,2 HP model 8620.

The Single Sideband PSA pad is molded from fireproof materials and will not loosen.  The vinyl die cut pads are designed for use with the 8000, 8200 or 9500 series transmitters. The 100% silicone rubber die cut pad's open-backed construction allows 1/8" air vent spacing between the pad and chassis to prevent heat build up and extend life of the replacement pad.  18 hole pattern with 4-5/8 centers.

The 4920/8620 Standard Replacement Pad is intended primarily to replace worn, damaged or heavily used Model 2000 PSA pads. The 4920/8620 Standard Replacement Pad also meets the specifications of Hutchins' Model 500, Model 2000 and Model 2500 or any other machine you may have that requires an 18 hole pneumatic pad.

Standard Pads for the 2000 Series models 4920, 4800, 4810 and 8620 provide cutting durability and drag free performance that lasts.

This is an aftermarket replacement pad, which is designed to fit a variety of HUTCHINS® air drill models including those listed below.

The Standard Replacement Pad for the 4920 and 8620 is a rubberized abrasive pad designed for use on belt sanders. The 4920/4921/8620 Pads are for use with type 1 or type 2 disc grinding wheels.

The Hutchins Standard Replacement Pad for the 4920/8620 is a replacement pad for the contact polisher from the HUT5011 and HUT5012 kits. It is made from 70 engineered wool in a diamond design for fast and easy pad changes. This pad will not damage the floor finish when used correctly.

MODEL 2000 VA/DF, VA/DF PSA Pad 18 Hole Pattern

Our red Deluxe Flangeless Wool Pad Model 2000 VA, DF has round holes and goes with the following polishers: 2 HP Porter Cable Model 4920,2 HP model 8620.

The Single Sideband PSA pad is molded from fireproof materials and will not loosen.  The vinyl die cut pads are designed for use with the 8000, 8200 or 9500 series transmitters. The 100% silicone rubber die cut pad's open-backed construction allows 1/8" air vent spacing between the pad and chassis to prevent heat build up and extend life of the replacement pad.  18 hole pattern with 4-5/8 centers.

The 4920/8620 Standard Replacement Pad is intended primarily to replace worn, damaged or heavily used Model 2000 PSA pads. The 4920/8620 Standard Replacement Pad also meets the specifications of Hutchins' Model 500, Model 2000 and Model 2500 or any other machine you may have that requires an 18 hole pneumatic pad.

Standard Pads for the 2000 Series models 4920, 4800, 4810 and 8620 provide cutting durability and drag free performance that lasts.

This is an aftermarket replacement pad, which is designed to fit a variety of HUTCHINS® air drill models including those listed below.

The Standard Replacement Pad for the 4920 and 8620 is a rubberized abrasive pad designed for use on belt sanders. The 4920/4921/8620 Pads are for use with type 1 or type 2 disc grinding wheels.

The Hutchins Standard Replacement Pad for the 4920/8620 is a replacement pad for the contact polisher from the HUT5011 and HUT5012 kits. It is made from 70 engineered wool in a diamond design for fast and easy pad changes. This pad will not damage the floor finish when used correctly.