INSTALLING ADAPTER OTC OTC314428 OTC314428

INSTALLING ADAPTER

INSTALLING ADAPTER OTC OTC314428

INSTALLING ADAPTER – GET THIS SPECIAL BUNDLE TO SECURE THE WATER HEATER IN EASIER AND MOST SAFE WAY. BUY IT FROM MY STORE OR CALL ME AND I CAN DELIVER IT TO YOUR PLACE.

INSTALLING ADAPTER for use with a condensate pump OTC #21358 to convert from a 2" NPT thread to a 3/4" MNPT connection.

INSTALLING ADAPTER USE THIS ENGINE AS A REPLACEMENT IF YOU HAVE AN EXISTING DIESEL PUMP. INSTALL THE ADAPTER ON THE PUMP USING 4 3/8" BOLTS TO SECURE IT.

These instructions will guide you through the installation of the adapter

INSTALLATION REQUIREMENTS: AN ADAPTER MAY BE REQUIRED TO INSTALL THIS VEHICLE. IF SO, YOU WILL NEED TO CALL 1-888-426-5755 OR VISIT OUR WEBSITE AT YOUR LOCAL PARTS STORE TO DETERMINE WHICH ADAPTER IS REQUIRED AND THE PRICE OF THE ADAPTER. PLEASE NOTE THIS SERVICE MAY TAKE 24 HOURS TO COMPLETE.

To connect your accessory to your vehicle, follow these steps: 1. Locate the port on the vehicle to which you wish to connect your accessory. Note if it is an input or output port. 2. Figure out which adapter you will need. Check the list thats included with this guide for more specific information about the ports you will be using. 3. Make sure each connector on the cable fits together in the proper sequence. Each wire has a small hole in it at one end of the connector. That hole must match up with the tab in the connector when wired together. Do not force any connectors together if they dont

INSTALLING ADAPTER

INSTALLING ADAPTER OTC OTC314428

INSTALLING ADAPTER – GET THIS SPECIAL BUNDLE TO SECURE THE WATER HEATER IN EASIER AND MOST SAFE WAY. BUY IT FROM MY STORE OR CALL ME AND I CAN DELIVER IT TO YOUR PLACE.

INSTALLING ADAPTER for use with a condensate pump OTC #21358 to convert from a 2" NPT thread to a 3/4" MNPT connection.

INSTALLING ADAPTER USE THIS ENGINE AS A REPLACEMENT IF YOU HAVE AN EXISTING DIESEL PUMP. INSTALL THE ADAPTER ON THE PUMP USING 4 3/8" BOLTS TO SECURE IT.

These instructions will guide you through the installation of the adapter

INSTALLATION REQUIREMENTS: AN ADAPTER MAY BE REQUIRED TO INSTALL THIS VEHICLE. IF SO, YOU WILL NEED TO CALL 1-888-426-5755 OR VISIT OUR WEBSITE AT YOUR LOCAL PARTS STORE TO DETERMINE WHICH ADAPTER IS REQUIRED AND THE PRICE OF THE ADAPTER. PLEASE NOTE THIS SERVICE MAY TAKE 24 HOURS TO COMPLETE.

To connect your accessory to your vehicle, follow these steps: 1. Locate the port on the vehicle to which you wish to connect your accessory. Note if it is an input or output port. 2. Figure out which adapter you will need. Check the list thats included with this guide for more specific information about the ports you will be using. 3. Make sure each connector on the cable fits together in the proper sequence. Each wire has a small hole in it at one end of the connector. That hole must match up with the tab in the connector when wired together. Do not force any connectors together if they dont