JIMS USA JIM1277 Jims Cam Shaft Removal and Installation Tool - --

TWIN CAM CAMSHAFT RMVR/INSTALLER

The TWIN CAM CAMSHAFT RMVR/INSTALLER delivers a smooth, effortless spread. This universal tool is designed to give you a complete camshaft installation, removal and measuring experience. The camshaft installer tool delivers a smooth, effortless spread that allows you to insert or remove cams without tearing the lobes.

The JIMS USA JIM1277 Twin Cam Camshaft Rmvr/Installer has a camshaft remover and installer. The remover and installer is constructed of hardened steel with anti-static finish, and measures: 44mm (1.73in) diameter x 27mm (1.06in) width, 30mm (1.18in) height; Overall length: 99mm (3.90in).

The Jim's USA Twin Cam Camshaft Remover/Installer has been designed to speed camshaft removal and installation in both hydraulic roller and solid rollers. It greatly reduces the time required to remove, install, or swap camshafts in all twin cam engines with Crane style retainers.

The JIMS Twin Cam Camshaft Remover makes removing your camshaft in one piece much easier. Simply insert the tool in the lifters, position sleeves and sprockets, and unscrew the hex nut. This tool works with all style cam nuts found on Harley-Davidson® V-twin engines. The non-contact design of this tool protects your engine from scratches, gouges or other damage when removing your camshaft. It is made out of chrome Vanadium steel for extra strength, and is compatible with both SAE/metric sizes.

The JIMS 21277 Twin Cam Cylinder Head Remover/Installer is perfect for removing or installing BOTH intake and exhaust cams, in one operation.

The Jims USA Twin Cam Camshaft Installer is fully adjustable and has a powerful, high torque handle. It will install or remove all of the most commonly used camshafts on the market today.

The Jims USA JIM1277 Twin Cam Engine Camshaft Installer works with ANY model engines of the following manufactures :- Kawasaki, Honda, Suzuki, Robison, Yahama & more.

The Twin Cam engine camshafts are machined billet steel units designed to adjust valve timing. The factory timing can be wired for performance or raced without worry of valve timing, while the ready-to-run cams are fully assembled with performance spring kits, hydraulic roller lifters and base circle alignments. The ramp angle on each camshaft is designed by JIMS to provide the highest possible horsepower and torque for your particular application.

The JIMS camshaft installer is made of steel and features a semi-circular design. It has a diameter of 5/8". This camshaft installer is compatible with S-200, Z-200, Z-202, Z-204, Z-540, Z-540A, A540, A544, A540B engines.

JIMS CUSTOM HONDA CAMSHAFT KIT IS THE MOST POPULAR KIT FOR CYLINDER WORK.

You always buy the best air tools. You always work with a close eye. You always check them before you use them, and then double check for accuracy. Now, JimsUSA offers its new line of air tools. They're all top brand names at a low price to fit any budget

Leaders in the development and production of innovative packaging machinery, JIMS USA also manufactures tools, tooling and equipment for specialized applications.

TWIN CAM CAMSHAFT RMVR/INSTALLER

The TWIN CAM CAMSHAFT RMVR/INSTALLER delivers a smooth, effortless spread. This universal tool is designed to give you a complete camshaft installation, removal and measuring experience. The camshaft installer tool delivers a smooth, effortless spread that allows you to insert or remove cams without tearing the lobes.

The JIMS USA JIM1277 Twin Cam Camshaft Rmvr/Installer has a camshaft remover and installer. The remover and installer is constructed of hardened steel with anti-static finish, and measures: 44mm (1.73in) diameter x 27mm (1.06in) width, 30mm (1.18in) height; Overall length: 99mm (3.90in).

The Jim's USA Twin Cam Camshaft Remover/Installer has been designed to speed camshaft removal and installation in both hydraulic roller and solid rollers. It greatly reduces the time required to remove, install, or swap camshafts in all twin cam engines with Crane style retainers.

The JIMS Twin Cam Camshaft Remover makes removing your camshaft in one piece much easier. Simply insert the tool in the lifters, position sleeves and sprockets, and unscrew the hex nut. This tool works with all style cam nuts found on Harley-Davidson® V-twin engines. The non-contact design of this tool protects your engine from scratches, gouges or other damage when removing your camshaft. It is made out of chrome Vanadium steel for extra strength, and is compatible with both SAE/metric sizes.

The JIMS 21277 Twin Cam Cylinder Head Remover/Installer is perfect for removing or installing BOTH intake and exhaust cams, in one operation.

The Jims USA Twin Cam Camshaft Installer is fully adjustable and has a powerful, high torque handle. It will install or remove all of the most commonly used camshafts on the market today.

The Jims USA JIM1277 Twin Cam Engine Camshaft Installer works with ANY model engines of the following manufactures :- Kawasaki, Honda, Suzuki, Robison, Yahama & more.

The Twin Cam engine camshafts are machined billet steel units designed to adjust valve timing. The factory timing can be wired for performance or raced without worry of valve timing, while the ready-to-run cams are fully assembled with performance spring kits, hydraulic roller lifters and base circle alignments. The ramp angle on each camshaft is designed by JIMS to provide the highest possible horsepower and torque for your particular application.

The JIMS camshaft installer is made of steel and features a semi-circular design. It has a diameter of 5/8". This camshaft installer is compatible with S-200, Z-200, Z-202, Z-204, Z-540, Z-540A, A540, A544, A540B engines.

JIMS CUSTOM HONDA CAMSHAFT KIT IS THE MOST POPULAR KIT FOR CYLINDER WORK.

You always buy the best air tools. You always work with a close eye. You always check them before you use them, and then double check for accuracy. Now, JimsUSA offers its new line of air tools. They're all top brand names at a low price to fit any budget

Leaders in the development and production of innovative packaging machinery, JIMS USA also manufactures tools, tooling and equipment for specialized applications.