K Tool International KTI70083 37 Degree Flare Die Set

37 Degree Flare Die Set

The 37 Degree Flare Die Set from K Tool International is a set of three 37 degree expansion/flare dies that are used for practical, hand-tooled, standard 37 degree aluminum sweat fittings. This die set easily converts a standard flare fitting to a precision 37 degree flare fitting. It is manufactured from heat treated steel for durability.

K Tool International 37 Degree Flare Die Set is used for flaring pipe. KTI70083 37 Degree Flare Die Set has a diameter of 3.5000 inches and a length of 2.0000 inches. The color of these flares are blue and silver. K Tool International KTI70083 37 Degree Flare Die Set weighs 0.0300 lbs.

A 37 Degree Flare Die Set creates flares into the end of tubing for easier installation. It is used for pipes or tubes having square, hex, or 11/16" and smaller outside diameters. The square shoulder is used to carry the load on the flare, and its angle allows the flare to expand. This K Tool International 37 degree flare die set uses a steel mandrel and hardened steel dies. These are not socket wrenches and are designed specifically for use with K Tool International Flare and Pipe Products Check out our YouTube video on setting a 37 Degree Flare: http://www.youtube.com/watch?v=

KTI70083 37 Degree Flare Die Set provides a precise and constant 37 degree flare curve for your tubes. Choose 1" OD body, 1-1/8" OD body, or 2-1/2" OD body to fit the diameter of your tube.

The sharp 37 Degree Flare Die Set is designed for impact performance, double locking and works with common tubing sizes.

KTI70083 CONRAD 37 Degree Flare Die Set fits the DYNA-TITE nut style fitting as well as most (1/2? – 9/16?) fittings on the market. They are Made from Hardened High Speed Steel for use with Malleable Iron, Cast Iron, or Steel Fittings. KTI flares have a precision ground tapered tang to ensure perfect alignment of flare and pipe threads.

The 37 Degree kinkless flare die is the perfect die for creating professional flares on drain, fuel, and water lines. The 37 degree tangent flare angle will create a better seal when compared to 45 degree flaring dies.

37 Degree Flare Die Set

The 37 Degree Flare Die Set from K Tool International is a set of three 37 degree expansion/flare dies that are used for practical, hand-tooled, standard 37 degree aluminum sweat fittings. This die set easily converts a standard flare fitting to a precision 37 degree flare fitting. It is manufactured from heat treated steel for durability.

K Tool International 37 Degree Flare Die Set is used for flaring pipe. KTI70083 37 Degree Flare Die Set has a diameter of 3.5000 inches and a length of 2.0000 inches. The color of these flares are blue and silver. K Tool International KTI70083 37 Degree Flare Die Set weighs 0.0300 lbs.

A 37 Degree Flare Die Set creates flares into the end of tubing for easier installation. It is used for pipes or tubes having square, hex, or 11/16" and smaller outside diameters. The square shoulder is used to carry the load on the flare, and its angle allows the flare to expand. This K Tool International 37 degree flare die set uses a steel mandrel and hardened steel dies. These are not socket wrenches and are designed specifically for use with K Tool International Flare and Pipe Products Check out our YouTube video on setting a 37 Degree Flare: http://www.youtube.com/watch?v=

KTI70083 37 Degree Flare Die Set provides a precise and constant 37 degree flare curve for your tubes. Choose 1" OD body, 1-1/8" OD body, or 2-1/2" OD body to fit the diameter of your tube.

The sharp 37 Degree Flare Die Set is designed for impact performance, double locking and works with common tubing sizes.

KTI70083 CONRAD 37 Degree Flare Die Set fits the DYNA-TITE nut style fitting as well as most (1/2? – 9/16?) fittings on the market. They are Made from Hardened High Speed Steel for use with Malleable Iron, Cast Iron, or Steel Fittings. KTI flares have a precision ground tapered tang to ensure perfect alignment of flare and pipe threads.

The 37 Degree kinkless flare die is the perfect die for creating professional flares on drain, fuel, and water lines. The 37 degree tangent flare angle will create a better seal when compared to 45 degree flaring dies.