K Tool International KTI70390 KTI MEGAHAMMER (Hub Removal Kit)

MEGAHAMMER

KTI's MEGAHAMMER is the Ultimate hub splitter. Made with a 100% heat-treated S2 alloy bit, it offers the strongest, fastest & safest method of prying wheels off of hubs. The ability to slide on & off on your 3/4" speeder is an added feature that most other tools don't offer. At over 9" long, this tool easily splits stubborn wheel studs in no time flat. KTI packaged this tool with:

KTI MEGAHAMMER Hub Remover Tool Kit fits to the end of any air impact wrench and is well suited for removing each individual hubcap and wheel nut on any vehicle; KTI MEGAHAMMER

The KOHLER MEGAHAMMER is designed for removing larger, oversize hubs from outboard boat motors without damaging the bearings. It also provides correct bearing cap striking power for aluminum or steel, inboard or outboard, late-model or original equipment. The tool's unique patented design is also used to remove small critical aged engines from the block of an engine.

This K Tool International KTI70390 KTI MEGAHAMMER (Hub Removal Kit) is designed with the necessary tools to remove stubborn hubs from wheels on passenger cars, light trucks, vans and SUV's. The kit includes the following: 5/8" Grade 8 Impact Socket with 80mm Hub Breaker Bar, 2 x 13/16" Grade 8 Sleeves, 21mm Socket & 3/4" Hub Breaker Bar, Removable Nut Driver (Metric), Removable Nut Driver (SAE), Wheel Bearing Grease Cap for premium lubrication while working

K Tool International KTI70390 KTI MEGAHAMMER (Hub Removal Kit).  This kit is designed to remove the 4 lug nuts, the center hub and bearing from the free hub on all Mercedes vehicles that use a removable hub. The KTI70390 uses new adjusters on each end of the tool to prevent damage to them that occurs with most other tools requiring multiple uses.

The KTI70390 KTI MEGAHAMMER is a high quality steel tool to assist in the hub removal of various motorcycle rotors. The uniquely shaped tapered jaw helps position the tool on the rotor while providing an accurate driving surface to keep the tool in place while driving out old hubs. It incorporates a six point hex head for extra strength and wrenching ability when compared to a five point head. Please check local regulations prior to using this tool.

If you can't remove the wheel hub with the MegaHammer, then it's not coming off.

MEGAHAMMER

KTI's MEGAHAMMER is the Ultimate hub splitter. Made with a 100% heat-treated S2 alloy bit, it offers the strongest, fastest & safest method of prying wheels off of hubs. The ability to slide on & off on your 3/4" speeder is an added feature that most other tools don't offer. At over 9" long, this tool easily splits stubborn wheel studs in no time flat. KTI packaged this tool with:

KTI MEGAHAMMER Hub Remover Tool Kit fits to the end of any air impact wrench and is well suited for removing each individual hubcap and wheel nut on any vehicle; KTI MEGAHAMMER

The KOHLER MEGAHAMMER is designed for removing larger, oversize hubs from outboard boat motors without damaging the bearings. It also provides correct bearing cap striking power for aluminum or steel, inboard or outboard, late-model or original equipment. The tool's unique patented design is also used to remove small critical aged engines from the block of an engine.

This K Tool International KTI70390 KTI MEGAHAMMER (Hub Removal Kit) is designed with the necessary tools to remove stubborn hubs from wheels on passenger cars, light trucks, vans and SUV's. The kit includes the following: 5/8" Grade 8 Impact Socket with 80mm Hub Breaker Bar, 2 x 13/16" Grade 8 Sleeves, 21mm Socket & 3/4" Hub Breaker Bar, Removable Nut Driver (Metric), Removable Nut Driver (SAE), Wheel Bearing Grease Cap for premium lubrication while working

K Tool International KTI70390 KTI MEGAHAMMER (Hub Removal Kit).  This kit is designed to remove the 4 lug nuts, the center hub and bearing from the free hub on all Mercedes vehicles that use a removable hub. The KTI70390 uses new adjusters on each end of the tool to prevent damage to them that occurs with most other tools requiring multiple uses.

The KTI70390 KTI MEGAHAMMER is a high quality steel tool to assist in the hub removal of various motorcycle rotors. The uniquely shaped tapered jaw helps position the tool on the rotor while providing an accurate driving surface to keep the tool in place while driving out old hubs. It incorporates a six point hex head for extra strength and wrenching ability when compared to a five point head. Please check local regulations prior to using this tool.

If you can't remove the wheel hub with the MegaHammer, then it's not coming off.