Lisle LIS39000 NO SLIP PULLEY PULLER

NO SLIP PULLEY PULLER

The NO SLIP PULLEY PULLER is designed to help remove pulleys, pullers and small fan clutches. Ideal for removing pulleys on the timing belt cover, water pump pulley, power steering pulley, etc.

The Lisle No Slip Pulley Puller is the ideal tool for taking tension off of a jack-knifed or broken chain when removing a pulley. This pulley puller features a tough, heat resistant, non-slip cushion grip that keeps your hands protected while working.

The Lisle No Slip Pulley Puller will grip even the most stubborn pulley and will not scratch, mar or otherwise damage the pulley. This pulley puller also features a built in wire cutter for cutting through zip ties, string, and shoestring type lashing straps etc. A must have tool for any automotive shop with service bays, especially useful when hard to reach belts need to be changed.

The Lisle No-Slip Pulley Puller removes pulleys without damaging the mounting surface or breaking the belt. Pulley must be mounted with three 8 mm (5/16 in.) bolts. Tool must be used with a rigid fixture.

Forged for use with a 3/4" drive ratchet, this pulley puller will safely and easily remove the pulley from the belt. The NO SLIP hooks are made of nylon and embedded in a high temperature cement to prevent slippage.

N eed a good way to get some leverage when pulling stubborn pulleys? This Pulley Puller uses a bolt and nut system to provide safety and control during pulley removal. Works with pulleys between 3/16" – 1" diameter. 3900 series aluminum alloy shaft features a knurled grip for controlled pulling and letting go. Measures 18" overall length, with a reach of 6" at the end of the handle.

Our pulley puller is made of aluminum and steel. Never again try to lift or move anything without the right tool. Our puller will make easy work of that job that used to be so hard.

NO SLIP PULLEY PULLER

The NO SLIP PULLEY PULLER is designed to help remove pulleys, pullers and small fan clutches. Ideal for removing pulleys on the timing belt cover, water pump pulley, power steering pulley, etc.

The Lisle No Slip Pulley Puller is the ideal tool for taking tension off of a jack-knifed or broken chain when removing a pulley. This pulley puller features a tough, heat resistant, non-slip cushion grip that keeps your hands protected while working.

The Lisle No Slip Pulley Puller will grip even the most stubborn pulley and will not scratch, mar or otherwise damage the pulley. This pulley puller also features a built in wire cutter for cutting through zip ties, string, and shoestring type lashing straps etc. A must have tool for any automotive shop with service bays, especially useful when hard to reach belts need to be changed.

The Lisle No-Slip Pulley Puller removes pulleys without damaging the mounting surface or breaking the belt. Pulley must be mounted with three 8 mm (5/16 in.) bolts. Tool must be used with a rigid fixture.

Forged for use with a 3/4" drive ratchet, this pulley puller will safely and easily remove the pulley from the belt. The NO SLIP hooks are made of nylon and embedded in a high temperature cement to prevent slippage.

N eed a good way to get some leverage when pulling stubborn pulleys? This Pulley Puller uses a bolt and nut system to provide safety and control during pulley removal. Works with pulleys between 3/16" – 1" diameter. 3900 series aluminum alloy shaft features a knurled grip for controlled pulling and letting go. Measures 18" overall length, with a reach of 6" at the end of the handle.

Our pulley puller is made of aluminum and steel. Never again try to lift or move anything without the right tool. Our puller will make easy work of that job that used to be so hard.