Lisle LIS65810 Replacement Pin Adapter for Door Adjuster

Replac Pin

Replacement pin for Lisle plastic door adjuster tool, model numbers 85558 and 97250. Fits automotive and motorcycle applications.

Set of replacement pins for use on all Lisle 7008 series Door Adjuster tools.

The Lisle LIS65810 Replacement Pin Adapter for Door Adjuster is used to extend the length of a set of pin adapters (LIS65646). The pin adaptor is used to help close a garage door via a chain hoist.

This Pin Adapter replaces the old style metal Prong with pin body and slide adapter piece. The new pin is made of nylon and has a swing-open gate.

This is a must have for those hard to adjust pin tumbler locks. This pin is used to help you get the pins adjusted so that you can then put in your key. It fits into holes 1, 2, 3, 8, and 9. It has both an angled and a flat end. You will need to remove the existing one with a 20mm wrench or socket wrench depending on the depth of it's installation. Once you remove the pin put this one in and then begin to use your key adjusting things until they start to work smoothly again. Pin #1 goes on the left side of the door and

The Lisle Range Door Adjuster Pin is for Genuine LIS65810 , it is a replacement for your lost or damaged pin adapter that attaches the door to the range.

The Lisle 65810 shaft and pin assembly is designed to replace broken or worn out pin adapters on certain applications of the Stewart Warner 1470 series adjusting doors. The replacement pin assembly was created to be a direct fit replacement for your existing broken shaft and pin assemblies.

Replac Pin

Replacement pin for Lisle plastic door adjuster tool, model numbers 85558 and 97250. Fits automotive and motorcycle applications.

Set of replacement pins for use on all Lisle 7008 series Door Adjuster tools.

The Lisle LIS65810 Replacement Pin Adapter for Door Adjuster is used to extend the length of a set of pin adapters (LIS65646). The pin adaptor is used to help close a garage door via a chain hoist.

This Pin Adapter replaces the old style metal Prong with pin body and slide adapter piece. The new pin is made of nylon and has a swing-open gate.

This is a must have for those hard to adjust pin tumbler locks. This pin is used to help you get the pins adjusted so that you can then put in your key. It fits into holes 1, 2, 3, 8, and 9. It has both an angled and a flat end. You will need to remove the existing one with a 20mm wrench or socket wrench depending on the depth of it's installation. Once you remove the pin put this one in and then begin to use your key adjusting things until they start to work smoothly again. Pin #1 goes on the left side of the door and

The Lisle Range Door Adjuster Pin is for Genuine LIS65810 , it is a replacement for your lost or damaged pin adapter that attaches the door to the range.

The Lisle 65810 shaft and pin assembly is designed to replace broken or worn out pin adapters on certain applications of the Stewart Warner 1470 series adjusting doors. The replacement pin assembly was created to be a direct fit replacement for your existing broken shaft and pin assemblies.