Manifold Template Ford 4.6L/5.4L

Manifold Template Ford 4.6L/5.4L

The Manifold Template for Ford 4.6L and 5.4L V8 Engines makes properly gapping your throttle body quick and easy! It is shaped to the ports on the latest Ford 4.6L and 5.4L modular engines, including: '09-up F150 - with dual plane intake manifold, '09-up Expedition with large distributor cap, & '09-up Explorer, Taurus & Fusion applications with "2V" distributor cap.

The Manifold Template was designed to help you make a precise core plug. This template is shaped specifically for the core plugs of the 4.6L and 5.4L engines found in Fords, Lincolns, Chevrolets, and Pontiacs. It follows the exhaust manifold contour very well allowing for a clean clamp on of the phenolic ring to seal the core plugs.

Use this Ford 4.6L/5.4L manifold pressure gauge template with your manifold gauge to check your calibration. Just plug the port on your manifold and fill in the stamped numbers with a pencil until you find an indication of 1,000 inHG or less vacuum indicating a need to recalibrate. Measuring guides are easy to read and pinpoint precise areas on the intake port for ease of use.

We have made this Ford 4.6 L/5.4 L manifold layout a downloadable template so you can simply print it out, tape it to your manifold, and mark the holes needed for a complete installation. Before, this could only be found as a hard-copy in automotive shops. Now anyone can do it.

The MBRP® Ford Mustang 4.6L/5.4L Manifold Flash Tuner is a complete intake manifold system, & you don't have to take yours out to install it. Simply remove the engine cover, and then pop this one in & mate the ports, using 3 of your existing bolts. That's it! The tuned design also includes secondary throttle modifications and tuned pipe flow dynamics so you get both maximum performance horsepower & increased torque throughout the powerband. This manifold flows up to 554 CFM at 28" vacuum draw. Includes molded in hardware for attaching to rear O2 sensors and O

The Edelbrock 2301 Two-Port EFI manifold plate is designed to simplify and speed up the installation of ceramic-etched, four-hole or six-hole (38/4037UNS) intake manifold plates on cast iron manifolds. The Manifold Template is made from high quality tool steel and can be used with a variety of Edelbrock Performer RPM intake manifold kits.

The manifold template makes it easy to mark and align the manifold to the head. This is a perfect tool when working on your vehicle's engine, for any of the following applications:

Manifold Template Ford 4.6L/5.4L

The Manifold Template for Ford 4.6L and 5.4L V8 Engines makes properly gapping your throttle body quick and easy! It is shaped to the ports on the latest Ford 4.6L and 5.4L modular engines, including: '09-up F150 - with dual plane intake manifold, '09-up Expedition with large distributor cap, & '09-up Explorer, Taurus & Fusion applications with "2V" distributor cap.

The Manifold Template was designed to help you make a precise core plug. This template is shaped specifically for the core plugs of the 4.6L and 5.4L engines found in Fords, Lincolns, Chevrolets, and Pontiacs. It follows the exhaust manifold contour very well allowing for a clean clamp on of the phenolic ring to seal the core plugs.

Use this Ford 4.6L/5.4L manifold pressure gauge template with your manifold gauge to check your calibration. Just plug the port on your manifold and fill in the stamped numbers with a pencil until you find an indication of 1,000 inHG or less vacuum indicating a need to recalibrate. Measuring guides are easy to read and pinpoint precise areas on the intake port for ease of use.

We have made this Ford 4.6 L/5.4 L manifold layout a downloadable template so you can simply print it out, tape it to your manifold, and mark the holes needed for a complete installation. Before, this could only be found as a hard-copy in automotive shops. Now anyone can do it.

The MBRP® Ford Mustang 4.6L/5.4L Manifold Flash Tuner is a complete intake manifold system, & you don't have to take yours out to install it. Simply remove the engine cover, and then pop this one in & mate the ports, using 3 of your existing bolts. That's it! The tuned design also includes secondary throttle modifications and tuned pipe flow dynamics so you get both maximum performance horsepower & increased torque throughout the powerband. This manifold flows up to 554 CFM at 28" vacuum draw. Includes molded in hardware for attaching to rear O2 sensors and O

The Edelbrock 2301 Two-Port EFI manifold plate is designed to simplify and speed up the installation of ceramic-etched, four-hole or six-hole (38/4037UNS) intake manifold plates on cast iron manifolds. The Manifold Template is made from high quality tool steel and can be used with a variety of Edelbrock Performer RPM intake manifold kits.

The manifold template makes it easy to mark and align the manifold to the head. This is a perfect tool when working on your vehicle's engine, for any of the following applications: