Mastercool MSC71097 -13 .19 in. Double Flare Adapter Die Set

Flaring, Double Flaring Adapter Kit

Mastercool MSC71097 Flare, double flare adapter kit will help you install a steel brake hose onto your car or truck. It comes with two adapters that can be attached to the end of a brake hose to allow it to attach to end of a tube. The kit also comes with two male ends that fit onto the small and large noses that are found on hydraulic brake cylinders. Assemble your own brake hoses using Mastercool MSC71097 flare, double flare adapter kit.

The Mastercool MSC71097 is a double flaring adapter set. It has a 13/16"x13/16" High Pressure Adapter Die, 9/16"x9/16" Medium Pressure Adapter Die, and 7/8"x7/8" Low Pressure Flare Die. The double flaring adapter kit comes with both of these flare dies to handle the medium pressure and low pressure flares.

Cuts, flare and double flare with this adapter kit. Make flares from 7/16 in. to 1/2 in. adapter dies cut tubing from 0.1045 in.wall thickness to 0.093 in wall thickness; small die set is 1.25 in long x 0.750 in diameter, large die set is 2.5 in long x 0.7375 in diameter

With Mastercool's double flaring adapter sets, you will be able to flare both inside and outside double flared pipes. These CNC machined adapters are replaceable, ergonomic with a knurled grip, and feature high polish finish for corrosion resistance. When you need a tool that will let you get the job done in less time and with less effort, choose Mastercool.

Mastercool's MSC71097-13 double flare adapter die set is designed for die sets of 1/4", 27/64", 11/32", 3/8" and 7/16." The kit allows you to make tight Sealing Flares. Without a doubt, this flaring adapter is very easy to use and far more cost effective than others out there. This double flare kit provides the ideal solution for those looking for a high quality product but at an attractive price.

This Mastercool MSC71097 -13 .19 in. Double Flare Adapter Die Set is used for flaring and double flaring of steel tubing.

One of the best ways to increase fuel mileage is to eliminate exhaust gas restrictions. This kit helps you do that by allowing you to flare and double flare tubing via thermal forming and honing process, making sure that the flares are perfect every time when they exit your dies. In addition to the standard tools for flaring & double flaring, this kit comes with a tool for high pressure straightening. All the stresses that can be produced, when thermalforming are eliminated with Mastercool's high pressure straightener. Honing is performed on finished product after thermalforming using Mastercool's swaging press with roller sleeve and on their

Flaring, Double Flaring Adapter Kit

Mastercool MSC71097 Flare, double flare adapter kit will help you install a steel brake hose onto your car or truck. It comes with two adapters that can be attached to the end of a brake hose to allow it to attach to end of a tube. The kit also comes with two male ends that fit onto the small and large noses that are found on hydraulic brake cylinders. Assemble your own brake hoses using Mastercool MSC71097 flare, double flare adapter kit.

The Mastercool MSC71097 is a double flaring adapter set. It has a 13/16"x13/16" High Pressure Adapter Die, 9/16"x9/16" Medium Pressure Adapter Die, and 7/8"x7/8" Low Pressure Flare Die. The double flaring adapter kit comes with both of these flare dies to handle the medium pressure and low pressure flares.

Cuts, flare and double flare with this adapter kit. Make flares from 7/16 in. to 1/2 in. adapter dies cut tubing from 0.1045 in.wall thickness to 0.093 in wall thickness; small die set is 1.25 in long x 0.750 in diameter, large die set is 2.5 in long x 0.7375 in diameter

With Mastercool's double flaring adapter sets, you will be able to flare both inside and outside double flared pipes. These CNC machined adapters are replaceable, ergonomic with a knurled grip, and feature high polish finish for corrosion resistance. When you need a tool that will let you get the job done in less time and with less effort, choose Mastercool.

Mastercool's MSC71097-13 double flare adapter die set is designed for die sets of 1/4", 27/64", 11/32", 3/8" and 7/16." The kit allows you to make tight Sealing Flares. Without a doubt, this flaring adapter is very easy to use and far more cost effective than others out there. This double flare kit provides the ideal solution for those looking for a high quality product but at an attractive price.

This Mastercool MSC71097 -13 .19 in. Double Flare Adapter Die Set is used for flaring and double flaring of steel tubing.

One of the best ways to increase fuel mileage is to eliminate exhaust gas restrictions. This kit helps you do that by allowing you to flare and double flare tubing via thermal forming and honing process, making sure that the flares are perfect every time when they exit your dies. In addition to the standard tools for flaring & double flaring, this kit comes with a tool for high pressure straightening. All the stresses that can be produced, when thermalforming are eliminated with Mastercool's high pressure straightener. Honing is performed on finished product after thermalforming using Mastercool's swaging press with roller sleeve and on their