Mayhew MY15061 STEEL PRODUCTS INC PUNCH 3/32 PIN 4 1/2 LONG

PUNCH 3/32 PIN 4 1/2 LONG

MAYHEW STEEL 3/32 PIN 4 1/2 LONG. Excellent for general purpose plumbing and electrical applications

Punches 3/32 Inch pin 4 1/2 inches long.

This is a 3/32 pin punch measuring 4-1/2 long. NO more chewing on nails or broken drill bits!! Pin punches are used to mark holes for drilling or to remove an already drilled pin. They are also used for making very fine adjustments to parts that have already been assembled.

The 3/32" Pin Punch has a straight shank and is 4 1/2" in length. The Punch is made of heat treated steel with a plastic handle.

The MY15061 is a 3/32" Pin, 4 1/2", straight, steel made in the U.S.A. Used for punching holes in plumbing pipes and sheet metal.

The Pin Punch is used to punch pins in and out of lock cylinders. The steel body guarantees durability, making the tool ideal for repeated use.

The .032" (1/32") pin is designed to bend sheet metal. The hardened steel pin will not bend or break. It is easily used with one hand; positioning the end of the spring in the hole provided in the top of punch. The punch tip should be placed inside material against which force is to be exerted. The punch tip should extend out enough to enter the hole in punch head. A hammer can then be used to strike punch against material, forcing the punch tip through to cut the material.

PUNCH 3/32 PIN 4 1/2 LONG

MAYHEW STEEL 3/32 PIN 4 1/2 LONG. Excellent for general purpose plumbing and electrical applications

Punches 3/32 Inch pin 4 1/2 inches long.

This is a 3/32 pin punch measuring 4-1/2 long. NO more chewing on nails or broken drill bits!! Pin punches are used to mark holes for drilling or to remove an already drilled pin. They are also used for making very fine adjustments to parts that have already been assembled.

The 3/32" Pin Punch has a straight shank and is 4 1/2" in length. The Punch is made of heat treated steel with a plastic handle.

The MY15061 is a 3/32" Pin, 4 1/2", straight, steel made in the U.S.A. Used for punching holes in plumbing pipes and sheet metal.

The Pin Punch is used to punch pins in and out of lock cylinders. The steel body guarantees durability, making the tool ideal for repeated use.

The .032" (1/32") pin is designed to bend sheet metal. The hardened steel pin will not bend or break. It is easily used with one hand; positioning the end of the spring in the hole provided in the top of punch. The punch tip should be placed inside material against which force is to be exerted. The punch tip should extend out enough to enter the hole in punch head. A hammer can then be used to strike punch against material, forcing the punch tip through to cut the material.