Mo-Clamp MOC5810 Down-Pull Assemblyâ„¢

Down-Pull Assemblyâ„¢

The Down-Pull Assemblyâ„¢ is the most versatile clamping system invented for the tree care industry.

The Down-Pull Assemblyâ„¢ is designed to be used with a monorail system. It is an economical way to move material up and down a monorail at about 3 feet per minute. The unit does not need any grease or oiling of slides and has no exposed surfaces that would allow contamination of product. Features include: 360 degree swivel boom and down-pull, cast iron wheel base, positive lock on switch for whole operation and safe stopping, positive locking truck assembly for safety, 10 gauge copper wire rope/chain drive.

The Down-Pull Assemblyâ„¢ is a gravity clamp that locks securely to an anchor point. It can lock onto roller chains, conveyor chains, vertical or horizontal spindles. This clamp has many applications and its most commonly used on the line itself for the carriage drive chain and the guide rail.

The MOC5810 Down-Pull Assemblyâ„¢ is a down-pull assembly housing, which is part of the truck up or down system and function. The function of this assembly is to provide the user with the ability to down-pull on the parking brake pedal and release it while still holding the position of the vehicle in place.

The Mo-Clamp MOC5810 Down-Pull Assemblyâ„¢ combines the strength of a fixed length double jaw alligator hanger with the versatility and ease of use of a ratcheting one hand clamp. Designed for load capacities up to 1000 lbs. the combination ratchet/pawl down pull movement provides a continuously variable tightening effect that reduces the tendency to over tighten while custom adjusting tension on minimal wires. The large handle has a locking feature making it safer for transportation as well as quick and easy loading and offloading applications.

Branch out and pick up some new attachments with this Down-Pull Assembly. This clamp-on design attaches easily to your current 6" Mo-Clampâ„¢ stud to let you pick up new tools and accessories. It is designed for slip-joint applications, such as attaching a vacuum regulator tool. The down-pull assembly weighs 4 pounds, 8 ounces and measures 7" x 3" x 2".

The MOC5810 Down-Pull Assemblyâ„¢ is designed for use with 8 to 10 mm OD cables. These assemblies are compatible with both straight and coiled cables. The assembly holds a NEMA 4X bolt, providing high strength in a compact design.

Down-Pull Assemblyâ„¢

The Down-Pull Assemblyâ„¢ is the most versatile clamping system invented for the tree care industry.

The Down-Pull Assemblyâ„¢ is designed to be used with a monorail system. It is an economical way to move material up and down a monorail at about 3 feet per minute. The unit does not need any grease or oiling of slides and has no exposed surfaces that would allow contamination of product. Features include: 360 degree swivel boom and down-pull, cast iron wheel base, positive lock on switch for whole operation and safe stopping, positive locking truck assembly for safety, 10 gauge copper wire rope/chain drive.

The Down-Pull Assemblyâ„¢ is a gravity clamp that locks securely to an anchor point. It can lock onto roller chains, conveyor chains, vertical or horizontal spindles. This clamp has many applications and its most commonly used on the line itself for the carriage drive chain and the guide rail.

The MOC5810 Down-Pull Assemblyâ„¢ is a down-pull assembly housing, which is part of the truck up or down system and function. The function of this assembly is to provide the user with the ability to down-pull on the parking brake pedal and release it while still holding the position of the vehicle in place.

The Mo-Clamp MOC5810 Down-Pull Assemblyâ„¢ combines the strength of a fixed length double jaw alligator hanger with the versatility and ease of use of a ratcheting one hand clamp. Designed for load capacities up to 1000 lbs. the combination ratchet/pawl down pull movement provides a continuously variable tightening effect that reduces the tendency to over tighten while custom adjusting tension on minimal wires. The large handle has a locking feature making it safer for transportation as well as quick and easy loading and offloading applications.

Branch out and pick up some new attachments with this Down-Pull Assembly. This clamp-on design attaches easily to your current 6" Mo-Clampâ„¢ stud to let you pick up new tools and accessories. It is designed for slip-joint applications, such as attaching a vacuum regulator tool. The down-pull assembly weighs 4 pounds, 8 ounces and measures 7" x 3" x 2".

The MOC5810 Down-Pull Assemblyâ„¢ is designed for use with 8 to 10 mm OD cables. These assemblies are compatible with both straight and coiled cables. The assembly holds a NEMA 4X bolt, providing high strength in a compact design.