Plews PLW75-755 LubriMatic 75-755 Galvanized Steel Automotive Drip Pan/Tray - Protects Driveways, Garages, and Storage Buildings from Oil and Transmission Fluid Leaks

DRIP PAN GALV SHEET METAL 17-1/2WX25-3/4LX1" HIGH

DRIP PAN GALV SHEET METAL 17-1/2WX25-3/4LX1" HIGH

Galvanized steel automotive drip pan/tray 17-1/2"Wx25-3/4"Lx1"H. Protects driveways, garages, and storage buildings from oil and transmission fluid leaks. Can be used with most light-duty service vehicles to contain fluid spills.

Protect garage, mud room, or storage building floors from drips and leaks with this heavy duty Galvanized Steel Drip Pan. It's 17-1/2" wide x 25-3/4" long and 1" high and works well for any size or style vehicle up to 5 tons.

This Plews LubriMatic PLW75-755 Galvanized Steel Automotive Drip Pan/Tray is made of durable galvanized steel. It is convenient and built to last long and protect your floors from oil and transmission fluid drips on the floor. This automotive drip pan has a 17-½" width, 25-3/4" length and 1" high. Its weight is approximately 15 lbs., which makes it very easy to transport and transfer from one vehicle to the other.

Protect your driveway, garage, or any other hard surface by using a Plews LubriMatic Galvanized Steel Automotive Drip Pan/Tray. This tray will make it easier to remove oil and transmission fluid leaks from seeping into the ground, so that you can drive on top of it.  The tray is galvanized steel for long life in outdoor environments. It is 17-1/2 inches wide, 25-3/4 inches long and has a lip height of 1 inch.

Protect your driveway, garage, or storage building from oil and transmission fluid leaks with this Rust-Riveted Galvanized Steel drip pan. This 16 gauge grade sheet metal pan has 6 welded corners and raised ¼" high flanges to contain drips and spills.

The LubriMatic? Drip Pan (PLW75-755) is a galvanized, steel drip pan for protection of concrete or asphalt surfaces. The 17-1/2 x 25-3/4 inch and 1 inch deep pan has perforations to let fluid flow through from underneath.

DRIP PAN GALV SHEET METAL 17-1/2WX25-3/4LX1" HIGH

DRIP PAN GALV SHEET METAL 17-1/2WX25-3/4LX1" HIGH

Galvanized steel automotive drip pan/tray 17-1/2"Wx25-3/4"Lx1"H. Protects driveways, garages, and storage buildings from oil and transmission fluid leaks. Can be used with most light-duty service vehicles to contain fluid spills.

Protect garage, mud room, or storage building floors from drips and leaks with this heavy duty Galvanized Steel Drip Pan. It's 17-1/2" wide x 25-3/4" long and 1" high and works well for any size or style vehicle up to 5 tons.

This Plews LubriMatic PLW75-755 Galvanized Steel Automotive Drip Pan/Tray is made of durable galvanized steel. It is convenient and built to last long and protect your floors from oil and transmission fluid drips on the floor. This automotive drip pan has a 17-½" width, 25-3/4" length and 1" high. Its weight is approximately 15 lbs., which makes it very easy to transport and transfer from one vehicle to the other.

Protect your driveway, garage, or any other hard surface by using a Plews LubriMatic Galvanized Steel Automotive Drip Pan/Tray. This tray will make it easier to remove oil and transmission fluid leaks from seeping into the ground, so that you can drive on top of it.  The tray is galvanized steel for long life in outdoor environments. It is 17-1/2 inches wide, 25-3/4 inches long and has a lip height of 1 inch.

Protect your driveway, garage, or storage building from oil and transmission fluid leaks with this Rust-Riveted Galvanized Steel drip pan. This 16 gauge grade sheet metal pan has 6 welded corners and raised ¼" high flanges to contain drips and spills.

The LubriMatic? Drip Pan (PLW75-755) is a galvanized, steel drip pan for protection of concrete or asphalt surfaces. The 17-1/2 x 25-3/4 inch and 1 inch deep pan has perforations to let fluid flow through from underneath.