Power Probe PPRTEMPPROBE Red Add-On Wireless Temperature Probe For Tempkit, 100 Pack

Add-On Wireless Temperature Probe for PPRTEMPKT

100 Red Add-On Wireless Temperature Probe for Tempkit Products need to be monitored? Not sure if your equipment is running at the right temperature? The PPRTEMPKT Power Probe-Tempkit Replacement Probe essentially gives you a second probe that can be used to monitor multiple pieces of equipment.

This Add-On Probe connects to the PPRTEMPKT Power Probe Kit and allows monitoring of 2 temperature probes at one time.

This Wireless Temperature Probe adds 80 new probe channels to the PPSDK. Whether you are using the PPRTEMPKT or an online service like Webkit.com, up to 240 probe channels and 720 temperature readings can be displayed on a single page. The probes are water resistant and will survive immersion up to 300 feet. A 100 pack of probes is included with this package, which would typically retail for $67 separately.

Power Probe™ Factory Replacement Wirelessly Programmable Thermocouple. This is a custom plug-in replacement probe for use with the Power Probe® TempKit (PPRTEMPKT)

The PPRTEMPPOBE is a simple SOOW cable that uses the 3-pin connector present on the back of the PPRTEMPKT.

The PPRTEMPPROBE is an add-on probe for the Weber Tempkit. It will work with gizmos on both iOS and Android, providing the same wireless temperature as the main probe. Model: PPRTEMPPROBE Red

The PPRTEMPPROBE is an add-on wireless temperature probe that works with the P.A.T. (Professional Alarm Tool) to wirelessly transmit probe temperature readings to a compatible Android or iOS smartphone or tablet by means of the RTP300/500 receiver module or RTP200 receiver, available separately. The probe comes in a 100-pack, which is convenient for use in schools and commercial kitchens to monitor food temperatures or monitoring school bus heaters.

Add-On Wireless Temperature Probe for PPRTEMPKT

100 Red Add-On Wireless Temperature Probe for Tempkit Products need to be monitored? Not sure if your equipment is running at the right temperature? The PPRTEMPKT Power Probe-Tempkit Replacement Probe essentially gives you a second probe that can be used to monitor multiple pieces of equipment.

This Add-On Probe connects to the PPRTEMPKT Power Probe Kit and allows monitoring of 2 temperature probes at one time.

This Wireless Temperature Probe adds 80 new probe channels to the PPSDK. Whether you are using the PPRTEMPKT or an online service like Webkit.com, up to 240 probe channels and 720 temperature readings can be displayed on a single page. The probes are water resistant and will survive immersion up to 300 feet. A 100 pack of probes is included with this package, which would typically retail for $67 separately.

Power Probe™ Factory Replacement Wirelessly Programmable Thermocouple. This is a custom plug-in replacement probe for use with the Power Probe® TempKit (PPRTEMPKT)

The PPRTEMPPOBE is a simple SOOW cable that uses the 3-pin connector present on the back of the PPRTEMPKT.

The PPRTEMPPROBE is an add-on probe for the Weber Tempkit. It will work with gizmos on both iOS and Android, providing the same wireless temperature as the main probe. Model: PPRTEMPPROBE Red

The PPRTEMPPROBE is an add-on wireless temperature probe that works with the P.A.T. (Professional Alarm Tool) to wirelessly transmit probe temperature readings to a compatible Android or iOS smartphone or tablet by means of the RTP300/500 receiver module or RTP200 receiver, available separately. The probe comes in a 100-pack, which is convenient for use in schools and commercial kitchens to monitor food temperatures or monitoring school bus heaters.