Precision Instruments PRETC3F175F 1/2” Torque Comparator, 0-175 lb.ft. (PRE-)

1/2? Torque Comparator, 0-175 lb.ft.

This Precision Instruments PRETC3F175F 1/2” Torque Comparator, 0-175 lb.ft. is the perfect tool for long motor, pinion and main gear installation. It can be used on any airplane with a PTU-5 (A1) torque wrench. Simple to operate, it has a handle that turns in both directions, with an arrow on the handle that points in the direction of rotation. The internal, pocket sized scale accurately reads up to 175

The P3174F 1/2? Torque Comparator is designed for measuring fastener tension and the preload in tension bolts. Although similar to a conventional Snap Gauge, the torque comparator is used on a multiplicity of applications where tension check (preload) needs to be maintained. In addition to the scale markings, there is a fixed pointer along with a vernier scale graduated in 2 lb.ft. increments from 0-100.

PRETC3F175F 1/2’? Torque Comparator is specifically designed for testing and setting torque tools to wrench values. High quality mechanism and precision components ensure repeatability, stability, and accuracy. The low range of 0-40 lb.ft. is ideal for general shop applications. The ergonomic T-handle allows precise pressure placement on the tester for accurate readings.

The PRETC3F175F 1/2? Torque Comparator features an easy to read dual scale, accurate to within 1%, and a rugged, needle-type indicator that operates smoothly with minimal backlash. It is ideal for Aerospace, Chemical Process, Industrial, Mil/Aero users, as well as anyone working with small precision parts requiring high accuracy. Also available in 1/8? (PRETC3F125F) and 3/16? (PRETC3F75F

The PRETC3F175F PRE Series Torque Comparator reads standard torque values up to 175 lb.ft or 100 Nm and is configurable for use with Calibration Certificate 3087-1. The PRE Series Torque Comparator is robust in design, made for mobile or production based test applications.

The PRETC3F175F 1/2” Torque Comparator is specifically designed for calibrating torque tools used in field and production calibrations such as torque wrenches, clamps, fasteners, hydraulic units, etc.This unique device allows the user to:*Calibrate torque tools directly and quickly on a bench without connecting the tool being calibrated into the testing fixture*Accurately verify calibration of tools being used in production*Carry out confidence checks more easily and inexpensive

State-of-the art digital readout is easy to read and accurate. Switch from ft.lb. to Nm or lb.in. easily at any time. Scale reads positive tightening force up to 175 lb.ft. (23 ft./lb.) for fast dynamic changes in position and speed detection; 0?-3,200?in/min (-12?-1500 rpm) in increments of 0?1?in/min (0?10 rpm). Scale reads maximum torque

1/2? Torque Comparator, 0-175 lb.ft.

This Precision Instruments PRETC3F175F 1/2” Torque Comparator, 0-175 lb.ft. is the perfect tool for long motor, pinion and main gear installation. It can be used on any airplane with a PTU-5 (A1) torque wrench. Simple to operate, it has a handle that turns in both directions, with an arrow on the handle that points in the direction of rotation. The internal, pocket sized scale accurately reads up to 175

The P3174F 1/2? Torque Comparator is designed for measuring fastener tension and the preload in tension bolts. Although similar to a conventional Snap Gauge, the torque comparator is used on a multiplicity of applications where tension check (preload) needs to be maintained. In addition to the scale markings, there is a fixed pointer along with a vernier scale graduated in 2 lb.ft. increments from 0-100.

PRETC3F175F 1/2’? Torque Comparator is specifically designed for testing and setting torque tools to wrench values. High quality mechanism and precision components ensure repeatability, stability, and accuracy. The low range of 0-40 lb.ft. is ideal for general shop applications. The ergonomic T-handle allows precise pressure placement on the tester for accurate readings.

The PRETC3F175F 1/2? Torque Comparator features an easy to read dual scale, accurate to within 1%, and a rugged, needle-type indicator that operates smoothly with minimal backlash. It is ideal for Aerospace, Chemical Process, Industrial, Mil/Aero users, as well as anyone working with small precision parts requiring high accuracy. Also available in 1/8? (PRETC3F125F) and 3/16? (PRETC3F75F

The PRETC3F175F PRE Series Torque Comparator reads standard torque values up to 175 lb.ft or 100 Nm and is configurable for use with Calibration Certificate 3087-1. The PRE Series Torque Comparator is robust in design, made for mobile or production based test applications.

The PRETC3F175F 1/2” Torque Comparator is specifically designed for calibrating torque tools used in field and production calibrations such as torque wrenches, clamps, fasteners, hydraulic units, etc.This unique device allows the user to:*Calibrate torque tools directly and quickly on a bench without connecting the tool being calibrated into the testing fixture*Accurately verify calibration of tools being used in production*Carry out confidence checks more easily and inexpensive

State-of-the art digital readout is easy to read and accurate. Switch from ft.lb. to Nm or lb.in. easily at any time. Scale reads positive tightening force up to 175 lb.ft. (23 ft./lb.) for fast dynamic changes in position and speed detection; 0?-3,200?in/min (-12?-1500 rpm) in increments of 0?1?in/min (0?10 rpm). Scale reads maximum torque