CONNECTOR MALE FOR PORTA POWERS
The Porto-Power connector is a coupling which accepts any standard 1/4 in. NPT male pipe thread and provides a Half Coupler for Porta Power washdown and pressure pot applications.
This Proto half coupler is the male connector for the Proto Porto-Power B65282 air compressor and features a 1/4" ram. It is a reliable metal construction for increased durability.
The ProtoPortoPower B65282 Half Couplers allow two separate Porta Power Air Compressors to operate simultaneously from the same power source. This eliminates any waiting to charge their air units and keeps the work going in continuous motion with minimal down time.
The Porto-Power Half Coupler provides a way to connect 2 Porto Power Grinders together. This includes all of the Proxxon half couplers, which are specific to the model of grinder. This coupler is made of metal and is meant for use with tools that are intended for finishing and polishing. Use this coupler to run your grinder at a lower speed, but still turn at the same rpm. The purpose is to get a slower cut, but with the versatility of being able to change blades as if you were using the full speed since the motor never slows down.
Our new Porto-Power® system offers general contractors a revolutionary way to power tools and equipment with compressed air. This innovative coupler provides the ability to connect a tool or equipment to any standard SCUBA tank regulator. Easy connection means less time spent on set-up, and more time getting the job done.
A Manufactured porto power half coupler that converts a front-end loader to a mid-mount tractor. This half coupler is built with a 1/4" ram and comes with a crimping sleeve and insert ring.
This is a H.D. Porto Power Half Coupler - 1/4" Ram with a Proto 15/16 Female SAE JIC Tank Side outlet
CONNECTOR MALE FOR PORTA POWERS
The Porto-Power connector is a coupling which accepts any standard 1/4 in. NPT male pipe thread and provides a Half Coupler for Porta Power washdown and pressure pot applications.
This Proto half coupler is the male connector for the Proto Porto-Power B65282 air compressor and features a 1/4" ram. It is a reliable metal construction for increased durability.
The ProtoPortoPower B65282 Half Couplers allow two separate Porta Power Air Compressors to operate simultaneously from the same power source. This eliminates any waiting to charge their air units and keeps the work going in continuous motion with minimal down time.
The Porto-Power Half Coupler provides a way to connect 2 Porto Power Grinders together. This includes all of the Proxxon half couplers, which are specific to the model of grinder. This coupler is made of metal and is meant for use with tools that are intended for finishing and polishing. Use this coupler to run your grinder at a lower speed, but still turn at the same rpm. The purpose is to get a slower cut, but with the versatility of being able to change blades as if you were using the full speed since the motor never slows down.
Our new Porto-Power® system offers general contractors a revolutionary way to power tools and equipment with compressed air. This innovative coupler provides the ability to connect a tool or equipment to any standard SCUBA tank regulator. Easy connection means less time spent on set-up, and more time getting the job done.
A Manufactured porto power half coupler that converts a front-end loader to a mid-mount tractor. This half coupler is built with a 1/4" ram and comes with a crimping sleeve and insert ring.
This is a H.D. Porto Power Half Coupler - 1/4" Ram with a Proto 15/16 Female SAE JIC Tank Side outlet
Free Shipping
