Proto BHK69477 Ram Half Coupler for Porta Power Sets (4 or 10 Ton)

COUPLER FOR RAM

This COUPLER FOR RAM is an accessory for your existing RAM and RAM-JIB, so it's easy to move them on and off your vehicle.

This Coupler is used to join two Ram/Valor Porta-power Sets 4 or 10 Tons together.

This coupler is used on the Ram Half Ram for shortening of two sections for storage or moving. The coupler is 1 5/8" diameter and includes (2) 2" pins, retainer pin and mounting hardware. Coupler has rolled edges, polished stainless steel, heat treated pins and zinc cad plating for optimal performance.

Use the BHK69477 Half Coupler to attach your single post Porta Power jack to a 5-leg RAM adapter. The ½” diameter hole and pin in the center of the coupler bolt match those on a Porta Power, so you’re sure of a secure fit. Great for ram-up jacking jobs where transport is required or when two hydraulic jacks are needed but not all four legs can be attached to one half coupler.

The well-known BHK69477 is a coupler for the Ram line of products. It, along with two pulleys, allows two 10-ton Power Sets to be combined and used as 20-ton set. Order the extra pulley along with this product to complete the extended set. Combine 2 x 1 x 4' Power Sets into a 20 ton PortaPower Set.

The Proto BHK69477 Ram Half Coupler for Porta Power Sets (4 or 10 Ton) allows an operator to tow or back up one half of an equipment set. The coupler can be attached to any one of the four ports on a truck, and snaps onto either the front hitch port or the rear hitch port of one unit in an equipment set.

This is the Proto BHK69477 Ram Half Coupler for Porta Power Sets (4 or 10 ton). Proto-Bilt has been making quality construction equipment and tools in the USA since 1903.

COUPLER FOR RAM

This COUPLER FOR RAM is an accessory for your existing RAM and RAM-JIB, so it's easy to move them on and off your vehicle.

This Coupler is used to join two Ram/Valor Porta-power Sets 4 or 10 Tons together.

This coupler is used on the Ram Half Ram for shortening of two sections for storage or moving. The coupler is 1 5/8" diameter and includes (2) 2" pins, retainer pin and mounting hardware. Coupler has rolled edges, polished stainless steel, heat treated pins and zinc cad plating for optimal performance.

Use the BHK69477 Half Coupler to attach your single post Porta Power jack to a 5-leg RAM adapter. The ½” diameter hole and pin in the center of the coupler bolt match those on a Porta Power, so you’re sure of a secure fit. Great for ram-up jacking jobs where transport is required or when two hydraulic jacks are needed but not all four legs can be attached to one half coupler.

The well-known BHK69477 is a coupler for the Ram line of products. It, along with two pulleys, allows two 10-ton Power Sets to be combined and used as 20-ton set. Order the extra pulley along with this product to complete the extended set. Combine 2 x 1 x 4' Power Sets into a 20 ton PortaPower Set.

The Proto BHK69477 Ram Half Coupler for Porta Power Sets (4 or 10 Ton) allows an operator to tow or back up one half of an equipment set. The coupler can be attached to any one of the four ports on a truck, and snaps onto either the front hitch port or the rear hitch port of one unit in an equipment set.

This is the Proto BHK69477 Ram Half Coupler for Porta Power Sets (4 or 10 ton). Proto-Bilt has been making quality construction equipment and tools in the USA since 1903.