SG Tool Aid SGT37260 SG Tool Aid Fuel Injection Pressure Test Adapter

FORD CFI ADAPTER (36100)

The SGT37260 is a Fuel Injection Pressure Test Adapter designed for use with the Ford CFI Engine. This premium quality adapter has been designed and manufactured to CFI spec and has been verified & calibrated to within 1 PSI of the pressure gauge. It comes complete with a hard chrome plated brass cap, aluminium tube extension, brass hose barb connector and a high quality CFI pressure gauge (HB283).

The innovative SG Tool Aid Model SGT37260 Injector Pressure Test Adapter allows technicians to perform an injector pressure test using either GM or Ford fuel systems by simply changing the fittings. This adapter is a necessity for those working on both GM and Ford CFI systems.

Here is the adapter you need for your pressure tester to test fuel injector pressures on a FORD Mustang.

The SGT37260 is the adapter to use with high pressure fuel injection systems. The SGT37260 is designed for use with the SGT37240 and SGT37250 adapters to install, run, and check Ford fuel injection systems using 1998 fuel pumps and above, until all engine codes have been cleared.

Say goodbye to the tiresome task of bleeding the fuel injection system on the 1996 + Ford 7.3L PowerStroke diesel. Spend less time and effort maintaining your vehicle with our Fuel Injection Pressure Test Adapter, for 3/8" fuel injector line, Parker 1-1/2" fittings, -33-52 PSI.

A necessity for every mechanic and technician! This adapter allows you to communicate with the on-board computer of any 1996 and newer vehicles through the OBD-II diagnostic port.

The Tool Aid fuel injection pressure test adapter is used to easily connect your manifold gauge or pressure transducer directly into the gas tank of your vehicle. Simply plug the adapter onto your test gauge or transducer, then screw it into the fuel line fitting on your vehicle.

FORD CFI ADAPTER (36100)

The SGT37260 is a Fuel Injection Pressure Test Adapter designed for use with the Ford CFI Engine. This premium quality adapter has been designed and manufactured to CFI spec and has been verified & calibrated to within 1 PSI of the pressure gauge. It comes complete with a hard chrome plated brass cap, aluminium tube extension, brass hose barb connector and a high quality CFI pressure gauge (HB283).

The innovative SG Tool Aid Model SGT37260 Injector Pressure Test Adapter allows technicians to perform an injector pressure test using either GM or Ford fuel systems by simply changing the fittings. This adapter is a necessity for those working on both GM and Ford CFI systems.

Here is the adapter you need for your pressure tester to test fuel injector pressures on a FORD Mustang.

The SGT37260 is the adapter to use with high pressure fuel injection systems. The SGT37260 is designed for use with the SGT37240 and SGT37250 adapters to install, run, and check Ford fuel injection systems using 1998 fuel pumps and above, until all engine codes have been cleared.

Say goodbye to the tiresome task of bleeding the fuel injection system on the 1996 + Ford 7.3L PowerStroke diesel. Spend less time and effort maintaining your vehicle with our Fuel Injection Pressure Test Adapter, for 3/8" fuel injector line, Parker 1-1/2" fittings, -33-52 PSI.

A necessity for every mechanic and technician! This adapter allows you to communicate with the on-board computer of any 1996 and newer vehicles through the OBD-II diagnostic port.

The Tool Aid fuel injection pressure test adapter is used to easily connect your manifold gauge or pressure transducer directly into the gas tank of your vehicle. Simply plug the adapter onto your test gauge or transducer, then screw it into the fuel line fitting on your vehicle.