Star Products STATU-15-20 Lang Tools Diesel Compression Adapter (3/8" Injector)

3/8" Diesel Comp Test Adpt

The STATU-15-20 Diesel Comp Test Adapter is a compression tester adapter used to measure diesel fuel injector flow and performance. The adapter is used with the Master Flow Injector Tester Kit (CAI-3200B) and features 1/4" pipe threads on one end and 3/8" pipe threads on the other.

This 3/8 inch straight, swivel diesel compression test adapter is designed to give you the ability to perform a compression test on a diesel engine. It features a heavy duty brass construction that allows it to withstand the pressures associated with compression testing and is coated with a black oxide finish. It has three different diameter ports: .625, 11/16, and 25/32-inch diameters. This product has the potential to save you hundreds of dollars by allowing you to perform compression tests at home or in your shop instead of calling in a professional.

This adapter is required to do diesel compression tests on 3/8" Weaver or 40 pin General Motors injector connectors. It will also adapt a 60, 70, 80, or 90 lb. per square inch gauge to a 3/8" connector if the end of the gauge or pressure tester fitting has 3/8" threads.

The STATU-15-20 Lang Tools Diesel Compression Adapter (3/8" Injector) is a part that facilitates research work. This adapter enables you to attach your hose and gauge to the injector. It features durable metal construction with a 2-1/2" diameter Schrader opening that fits easily onto the test port of most engines.

This is a Diesel compression Adapter, Has a Threads : 3/8" BSPT Male to 1/4" NPT (BSPT = British Standard Pipe Taper) Female.

The STATU-15-20 Lang Tools Diesel Compression Adapter from Star Products controls air flow into the cylinder, thereby controlling engine torque. This diesel compression tester contains a large easy to read gauge and will adapt 3/8" male outlets for use with corrugated hoses, anvils, or other applications where it is necessary to measure the actual pressure in a running engine.

The STATU-15/20 Compression Adapter was designed to test compression on 3/8 inch diesel fuel injected engines. It allows you to connect a standard air hose (not included) to the adapter and perfectly regulate the compression pressure in the cylinder. The Adapters´ high quality molded components can with stand a lot of stress while measured and controlled tight tolerances produces accurate and repeatable results.

3/8" Diesel Comp Test Adpt

The STATU-15-20 Diesel Comp Test Adapter is a compression tester adapter used to measure diesel fuel injector flow and performance. The adapter is used with the Master Flow Injector Tester Kit (CAI-3200B) and features 1/4" pipe threads on one end and 3/8" pipe threads on the other.

This 3/8 inch straight, swivel diesel compression test adapter is designed to give you the ability to perform a compression test on a diesel engine. It features a heavy duty brass construction that allows it to withstand the pressures associated with compression testing and is coated with a black oxide finish. It has three different diameter ports: .625, 11/16, and 25/32-inch diameters. This product has the potential to save you hundreds of dollars by allowing you to perform compression tests at home or in your shop instead of calling in a professional.

This adapter is required to do diesel compression tests on 3/8" Weaver or 40 pin General Motors injector connectors. It will also adapt a 60, 70, 80, or 90 lb. per square inch gauge to a 3/8" connector if the end of the gauge or pressure tester fitting has 3/8" threads.

The STATU-15-20 Lang Tools Diesel Compression Adapter (3/8" Injector) is a part that facilitates research work. This adapter enables you to attach your hose and gauge to the injector. It features durable metal construction with a 2-1/2" diameter Schrader opening that fits easily onto the test port of most engines.

This is a Diesel compression Adapter, Has a Threads : 3/8" BSPT Male to 1/4" NPT (BSPT = British Standard Pipe Taper) Female.

The STATU-15-20 Lang Tools Diesel Compression Adapter from Star Products controls air flow into the cylinder, thereby controlling engine torque. This diesel compression tester contains a large easy to read gauge and will adapt 3/8" male outlets for use with corrugated hoses, anvils, or other applications where it is necessary to measure the actual pressure in a running engine.

The STATU-15/20 Compression Adapter was designed to test compression on 3/8 inch diesel fuel injected engines. It allows you to connect a standard air hose (not included) to the adapter and perfectly regulate the compression pressure in the cylinder. The Adapters´ high quality molded components can with stand a lot of stress while measured and controlled tight tolerances produces accurate and repeatable results.