Thexton THX490-M THE490M Mixed Heavy Duty Back Probe Kit

Assorted Back Probe Pin Kit

The Back Probe Pin Kit comes with 24 assorted oversized, straight pins, and 4 Riveted Probes. Each pin is 14.5 inches long and it's tip has a 1/4 inch shank. These pins are made of a steel alloy to stand up to the toughest jobs (1/2" Pin with rivet).

A Mixed Assortment of 6" to 18" Back Probe Pins to meet your needs.

Complete assortment of back probe pin kit for industrial troubleshooting & repair. Includes 7 tips for function testing and maintenance, load sharing, and resistance measurements.

The Mixed Heavy Duty Back Probe Pin Kit, Part No. THX490-M (THX490M) features four pins used in back probing and a variety of other calibration testing applications. The probe pins are magnetized for non-contact detection of conductive materials. This kit includes four back probe pin assemblies, each with a 1/4" cable termination and alligator clips on both ends of the 1.5 meter (59") cable: THP-450 with 1/4" shaft diameter and 1mm x 30mm tapered shank, THP-455 with 3/16" shaft diameter and

The Mixed Heavy Duty Back Probe Pin Kit is a standard collection of back pins that range in sizes.  The one required first step in probing circuit boards is to determine whether the suspect component being tested is actually bad or has some other fault in the circuit. This is done using a multimeter and inserting an alligator clip test lead into each of the component leads (pins).

This Thexton back pin kit provides you with a collection of assorted back pin probes. This heavy-duty collection features 1/4", 3/8", and ¼" diameter shafts in a size range from 3' to 5' in overall length. This assortment of stainless steel probes is ideal for use on low voltage/power applications.

The THX490-M Mixed Heavy Duty Back Probe Kit contains the most popular back probing tips for all wire sizes. Including large, medium, and small pins. The back pin kit also includes a switch for alligator clips and an assortment of clamps.

Assorted Back Probe Pin Kit

The Back Probe Pin Kit comes with 24 assorted oversized, straight pins, and 4 Riveted Probes. Each pin is 14.5 inches long and it's tip has a 1/4 inch shank. These pins are made of a steel alloy to stand up to the toughest jobs (1/2" Pin with rivet).

A Mixed Assortment of 6" to 18" Back Probe Pins to meet your needs.

Complete assortment of back probe pin kit for industrial troubleshooting & repair. Includes 7 tips for function testing and maintenance, load sharing, and resistance measurements.

The Mixed Heavy Duty Back Probe Pin Kit, Part No. THX490-M (THX490M) features four pins used in back probing and a variety of other calibration testing applications. The probe pins are magnetized for non-contact detection of conductive materials. This kit includes four back probe pin assemblies, each with a 1/4" cable termination and alligator clips on both ends of the 1.5 meter (59") cable: THP-450 with 1/4" shaft diameter and 1mm x 30mm tapered shank, THP-455 with 3/16" shaft diameter and

The Mixed Heavy Duty Back Probe Pin Kit is a standard collection of back pins that range in sizes.  The one required first step in probing circuit boards is to determine whether the suspect component being tested is actually bad or has some other fault in the circuit. This is done using a multimeter and inserting an alligator clip test lead into each of the component leads (pins).

This Thexton back pin kit provides you with a collection of assorted back pin probes. This heavy-duty collection features 1/4", 3/8", and ¼" diameter shafts in a size range from 3' to 5' in overall length. This assortment of stainless steel probes is ideal for use on low voltage/power applications.

The THX490-M Mixed Heavy Duty Back Probe Kit contains the most popular back probing tips for all wire sizes. Including large, medium, and small pins. The back pin kit also includes a switch for alligator clips and an assortment of clamps.