UVIEW UVU560000 U-View Hydro Carbon Radiator Leak Cooling System Tester

COMBUSTION BLOCK LEAK TEST FOR GAS & DIESEL

The Hydro Carbon Radiator Leak Cooling System Tester is used for detecting the combustion block leak and locating the ignition source by hydrocarbon leakage. It is applicable to various kinds of gasoline, diesel and LPG internal combustion engines under 0.5L displacement with a minimum air volume of 8-10L per minute.

The UVU560000 is designed to be used in conjunction with the UVU584000 combustion block leak tester. The UVU560000 is the basic model designed for cylinder head testing. Hydrocarbon coolant is pumped through the pressure regulator into the test port where it mixes with combustion gases in the cylinder head to form a coolant/gas mixture. The mixture then passes through an orifice and into the NACA air intake where it is then drawn through a heated plenum by the submersed pump.

U-View™ is a LCD Block Leak Tester. With just the press of a button you will know if your combustion block is leaking, allowing you to repair it before serious damage can occur to your valves, pistons or cylinders. It features an extremely accurate vacuum pump which produces pressures down to 100 mbar (1 mbar = 1 hPa) and it is designed from tough polyurethane materials for added durability.

Check for block-burn leak easily at one glance. The red pointer spot is on the combustion side. It is safer and easier to use than any other combustion leak checker in the market. Just follow these three simple operations:

The UVU560000 UVIEW™ U-View Hydro Carbon Radiator Leak Cooling System Tester is a block leak testing tool designed to test the integrity of the radiator cooling system on US spec automobiles manufactured since 1992. Automotive manufacturers use block leak testing to determine if there are any leaks in the radiator, condenser or heater core. The UVU560000 is used to inspect the radiator for hydrocarbon leaks, and does not leak coolant. It uses a water-based non-toxic dye and after searching for leaks it can be easily removed with water and soap.

The newest technology in leak detection - Uview™. This tester allows you to view all levels of leak secrets, as it checks for combustion and pressure leaks in seconds. It's ready to use instantly - no set up required. The built-in color-coded gas level indicators make the results easy to read.

Uview Radiator Leak Detection Tester: Uview™ is the simple solution for finding coolant or combustion fluid leaks in one easy step. No more flushing down the radiator with plain water, our electronic radiator leak detection tester is quick and easy to use using it's conductivity sensor. Just hook it up to your car battery and check for leaks within 60 seconds. It's safe, effective and an intelligent replacement to the slide hammer

COMBUSTION BLOCK LEAK TEST FOR GAS & DIESEL

The Hydro Carbon Radiator Leak Cooling System Tester is used for detecting the combustion block leak and locating the ignition source by hydrocarbon leakage. It is applicable to various kinds of gasoline, diesel and LPG internal combustion engines under 0.5L displacement with a minimum air volume of 8-10L per minute.

The UVU560000 is designed to be used in conjunction with the UVU584000 combustion block leak tester. The UVU560000 is the basic model designed for cylinder head testing. Hydrocarbon coolant is pumped through the pressure regulator into the test port where it mixes with combustion gases in the cylinder head to form a coolant/gas mixture. The mixture then passes through an orifice and into the NACA air intake where it is then drawn through a heated plenum by the submersed pump.

U-View™ is a LCD Block Leak Tester. With just the press of a button you will know if your combustion block is leaking, allowing you to repair it before serious damage can occur to your valves, pistons or cylinders. It features an extremely accurate vacuum pump which produces pressures down to 100 mbar (1 mbar = 1 hPa) and it is designed from tough polyurethane materials for added durability.

Check for block-burn leak easily at one glance. The red pointer spot is on the combustion side. It is safer and easier to use than any other combustion leak checker in the market. Just follow these three simple operations:

The UVU560000 UVIEW™ U-View Hydro Carbon Radiator Leak Cooling System Tester is a block leak testing tool designed to test the integrity of the radiator cooling system on US spec automobiles manufactured since 1992. Automotive manufacturers use block leak testing to determine if there are any leaks in the radiator, condenser or heater core. The UVU560000 is used to inspect the radiator for hydrocarbon leaks, and does not leak coolant. It uses a water-based non-toxic dye and after searching for leaks it can be easily removed with water and soap.

The newest technology in leak detection - Uview™. This tester allows you to view all levels of leak secrets, as it checks for combustion and pressure leaks in seconds. It's ready to use instantly - no set up required. The built-in color-coded gas level indicators make the results easy to read.

Uview Radiator Leak Detection Tester: Uview™ is the simple solution for finding coolant or combustion fluid leaks in one easy step. No more flushing down the radiator with plain water, our electronic radiator leak detection tester is quick and easy to use using it's conductivity sensor. Just hook it up to your car battery and check for leaks within 60 seconds. It's safe, effective and an intelligent replacement to the slide hammer