Wilton WIL22003 540A-4, 540A Series C-Clamp, 0-Inch-4-Inch Jaw Opening, 2-1/16-Inch Throat Depth

Clamp C 0-4 2-1

This C-clamp has a 0 to 4" jaw opening, a 2-1/16" throat depth and a 540A series size.

This 1/2×1/2-inch jaw c-clamp accommodates workpieces from 0 to 4 inches. It has a 2-1/16-inch throat depth, a 610 PSI working pressure and a 360 degree swivel. Its nickel plated finish allows for easy cleanup and its reliable jaw design offers maximum accuracy and durability.

C-clamp jaws (closed 4-inch) feathered on both sides for a secure hold prevent slipping and marring. Clamp jaws have a maximum opening of 2-1/16 inches and provide a throat depth of 0 to 4 inches. Aluminum body casting is anodized for superior corrosion resistance. Carbon steel compression springs ensure a strong clamping action. Handle with care; do not drop the jaws closed on your hand.

The Wilton C-clamp is available in two jaw capacities, 0-4 inches and 0-8 inches. It features a cast iron body that's heat resistant to temperatures of up to 550 degrees Fahrenheit.

A C-clamp for smaller work that features a 1/2" diameter threaded rod with a milled head at one end and a threaded bolt on the other. The C-clamp is made from cast aluminum, finished with a tough gray powder coat, and sealed to prevent rust and corrosion. With double-set cams for non-slip clamping action, this clamp will securely hold items of almost any size.

Open and close jaws with one 1/4 turn of the handle. Single C series jaws have no obstructive ears that could bend wire or interfere with your work. Recommended for use with #102698 and #105406 end-holding pliers, Xcelite 04301-C.

C-Clamps are made of heat-treated steel for strength and durability. The movable jaw allows the C-clamp to adapt to commercial pipe sizes.

Clamp C 0-4 2-1

This C-clamp has a 0 to 4" jaw opening, a 2-1/16" throat depth and a 540A series size.

This 1/2×1/2-inch jaw c-clamp accommodates workpieces from 0 to 4 inches. It has a 2-1/16-inch throat depth, a 610 PSI working pressure and a 360 degree swivel. Its nickel plated finish allows for easy cleanup and its reliable jaw design offers maximum accuracy and durability.

C-clamp jaws (closed 4-inch) feathered on both sides for a secure hold prevent slipping and marring. Clamp jaws have a maximum opening of 2-1/16 inches and provide a throat depth of 0 to 4 inches. Aluminum body casting is anodized for superior corrosion resistance. Carbon steel compression springs ensure a strong clamping action. Handle with care; do not drop the jaws closed on your hand.

The Wilton C-clamp is available in two jaw capacities, 0-4 inches and 0-8 inches. It features a cast iron body that's heat resistant to temperatures of up to 550 degrees Fahrenheit.

A C-clamp for smaller work that features a 1/2" diameter threaded rod with a milled head at one end and a threaded bolt on the other. The C-clamp is made from cast aluminum, finished with a tough gray powder coat, and sealed to prevent rust and corrosion. With double-set cams for non-slip clamping action, this clamp will securely hold items of almost any size.

Open and close jaws with one 1/4 turn of the handle. Single C series jaws have no obstructive ears that could bend wire or interfere with your work. Recommended for use with #102698 and #105406 end-holding pliers, Xcelite 04301-C.

C-Clamps are made of heat-treated steel for strength and durability. The movable jaw allows the C-clamp to adapt to commercial pipe sizes.