Woodward Fab HECWFB2STAND STAND FOR WFB2 BENDER

STAND FOR WFB2 BENDER

Pain: Always having to bend down to get your wheelbarrow into the perfect position. Agitate: Have you ever found yourself in this situation? Solution: Woodward Fab have the answer. All you need is a STAND FOR WFB2 BENDER. Not only will it keep your wheelbarrow steady, it also allows for some height adjustment.

Pain: Your needs are not being met by existing solutions. Agitate: You have been waiting for a solution to come along to solve your problem but none has yet arrived. Solution: The new Woodward Fab HECWFB2STAND STAND FOR WFB2 BENDER is the solution to your problems.

Pain: You must have a damaged or lost stand for your WFB2 Bender. Agitate: But no one makes such a thing. No one! That’s right, there is no substitute option. Solution: Woodward Fab can help you with your stand issue.

Pain: Loading your drink vending machine at the end of the night is a pain, especially if you have to do it frequently. Agitate: You may even find yourself tempted to ignore the machine until morning – don’t waste your money, DON’T DO IT! Solution: The HECWFB2STAND is specially designed to hold your WFB2 Bender vending machine in a vertical position. With this stand all you need to do is add the water, which means no more bending down to load. The stand also doubles as a storage space for extra parts in case you run out during operation. But not only does it save you time and money on your Bender drinks by keeping your vending machine up and running, it also

Pain: Working with the HEC WFB2 Bender is awkward. Agitate: You can’t see what you are doing. You keep banging your knees on the legs. And there’s nowhere to put the injector! Solution: The Woodward Fab STAND is a table that holds and stabilises your bender while you bend or straighten copper tubing. It has a large surface area, allowing you to do more jobs at once, meaning savings – and it has a place for all your bender tools. It’s so sturdy it can hold a full length bend, too, which not many benders can do! (Without using expensive clamps.)

Pain: Existing solutions for WFB2 Bender not only cost thousands, but they are extremely complex and tedious to use. They take a lot of time and effort to set up. It becomes difficult to work with many filaments. Many fall off the spool. Agitate: It is hard to store filaments. Solutions similar to our product exist but are expensive, complicated and prone to failure. Solution: Our simple and affordable product significantly compliments available 3D Systems’ WFB2 machine. Our product has been designed with ease-of-use in mind. The user simply needs to place our stand into the WFB2 machine which does the rest by supporting filaments on its sides so that it is stable and maximizes output time

The WFB2 Bender is an easy to use, cost effective bender that fits in a shop environment. This product holds up to 4 sheets of material, by rolling the work piece on solid, two sided rollers. The bender is controlled by a foot pedal, with manual override.  The standard WFB2 Bender can bend steel from .125" to 1/2” and aluminum from .060" to 3/4” thick.  The maximum overall length of the sheet that can be bent is 180 inches. The Bender ships as a single packed unit for assembly in the shop environment, (assembly takes about fifteen minutes.) The frame and each roller sets on five inch wheels. Two drive rollers are mounted

STAND FOR WFB2 BENDER

Pain: Always having to bend down to get your wheelbarrow into the perfect position. Agitate: Have you ever found yourself in this situation? Solution: Woodward Fab have the answer. All you need is a STAND FOR WFB2 BENDER. Not only will it keep your wheelbarrow steady, it also allows for some height adjustment.

Pain: Your needs are not being met by existing solutions. Agitate: You have been waiting for a solution to come along to solve your problem but none has yet arrived. Solution: The new Woodward Fab HECWFB2STAND STAND FOR WFB2 BENDER is the solution to your problems.

Pain: You must have a damaged or lost stand for your WFB2 Bender. Agitate: But no one makes such a thing. No one! That’s right, there is no substitute option. Solution: Woodward Fab can help you with your stand issue.

Pain: Loading your drink vending machine at the end of the night is a pain, especially if you have to do it frequently. Agitate: You may even find yourself tempted to ignore the machine until morning – don’t waste your money, DON’T DO IT! Solution: The HECWFB2STAND is specially designed to hold your WFB2 Bender vending machine in a vertical position. With this stand all you need to do is add the water, which means no more bending down to load. The stand also doubles as a storage space for extra parts in case you run out during operation. But not only does it save you time and money on your Bender drinks by keeping your vending machine up and running, it also

Pain: Working with the HEC WFB2 Bender is awkward. Agitate: You can’t see what you are doing. You keep banging your knees on the legs. And there’s nowhere to put the injector! Solution: The Woodward Fab STAND is a table that holds and stabilises your bender while you bend or straighten copper tubing. It has a large surface area, allowing you to do more jobs at once, meaning savings – and it has a place for all your bender tools. It’s so sturdy it can hold a full length bend, too, which not many benders can do! (Without using expensive clamps.)

Pain: Existing solutions for WFB2 Bender not only cost thousands, but they are extremely complex and tedious to use. They take a lot of time and effort to set up. It becomes difficult to work with many filaments. Many fall off the spool. Agitate: It is hard to store filaments. Solutions similar to our product exist but are expensive, complicated and prone to failure. Solution: Our simple and affordable product significantly compliments available 3D Systems’ WFB2 machine. Our product has been designed with ease-of-use in mind. The user simply needs to place our stand into the WFB2 machine which does the rest by supporting filaments on its sides so that it is stable and maximizes output time

The WFB2 Bender is an easy to use, cost effective bender that fits in a shop environment. This product holds up to 4 sheets of material, by rolling the work piece on solid, two sided rollers. The bender is controlled by a foot pedal, with manual override.  The standard WFB2 Bender can bend steel from .125" to 1/2” and aluminum from .060" to 3/4” thick.  The maximum overall length of the sheet that can be bent is 180 inches. The Bender ships as a single packed unit for assembly in the shop environment, (assembly takes about fifteen minutes.) The frame and each roller sets on five inch wheels. Two drive rollers are mounted